User manual SONY ST-JX521

[. . . ] To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] With Auto-betical Select you can automatically store up to 30 FM and FM RDS stations in alphabetical order without redundancy. Additionally, Auto-betical Select only stores the stations with the clearest signals. This section shows you how to store up to 30 of your favorite FM or AM (FM, MW or LW: European model) stations manually onto preset codes made up of characters (A, B, or C) and numbers (1 - 0), such as A7. You can use these letters to classify stations according to music category or station band. "MEMORY" appears along with the lowest vacant code to indicate that the tuner is ready to store the station. Each time you turn TUNING/SELECT, a preset station is received and the settings (preset code, frequency, and station name, etc. 5 Repeat steps 1 through 4 to store other When you preset an RDS station broadcasting station name information, the station name is automatically stored at the station preset (European model only). â· If you want to label the stations, follow the procedure described in "Naming the preset stations" on page 11. This tuner uses a menu entry system which allows you to operate various functions by following messages on the display. This tuner lets you enter a station's frequency directly by using the numeric buttons (Direct Tuning). If you do not know the frequency of the station you want, see "Receiving broadcasts by scanning stations (Automatic Tuning)" on page 10. This tuner makes it easy to arrange preset stations in the order you prefer. You can arrange all the preset stations automatically, according to alphabetical order, signal strength, country code, or tuner band, or you can use the Move and Erase functions to move and erase specific preset stations. Press CHARACTER to move the cursor into position for the next character. If you make a mistake Press CHARACTER repeatedly until the character you want to change flashes (every time you press CHARACTER, the next character flashes). Sort preset stations in alphabetical order according to their preset names. Stations without preset names are arranged by frequency, from low to high. Sort preset stations in order of their signal strength (FM stations only). "MEMORY" appears along with the lowest vacant code to indicate that the tuner is ready to store the station. The display returns to normal display mode if you stop assigning names for more than 8 seconds. Sort preset stations in order of their frequency band (FM - AM (MW LW)). Some countries use the same country code, and the stations from these counties may be arranged together. [. . . ] When a station broadcasts radio text data, the display shows the data at the rate it is sent from the station. The display speed changes in relation to the speed at which the data is sent. Each time you press EON NEWS/INFO, the display changes cyclically as follows: NEWS t INFO t NEWS/INFO t OFF When the tuner automatically tunes in a news or information programme, the respective indicator flashes. If you do not want to listen to the entire programme, press EON NEWS/INFO to switch back to the original station. [. . . ]