User manual SONY RM-TP504

[. . . ] 4-227-951-14(1) Remote Commander Operating Instructions RM-TP504 © 2000 by Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. For the customers in United States WARNING Battery may explode if mistreated, do not recharges, disassemble or dispose of in fire. When the battery becomes weak or dead, replace the battery with a Sony CR2032 lithium battery, use of any other battery may present a risk of fire or explosion. These cells are intended for use at ordinary temperatures where anticipated high temperature excursions are not expected to exceed 100 °C (212 F). These cells should not be connected in series with electrical power source that would increase the forward current through the cells. CAUTION You are cautioned that any changes or modification not expressly approved in this manual could void your authority to operate this equipment. Precautions For the customers in Europe CAUTION (Lithium battery CR2032) Danger of explosion if battery is incorrectly replaced. [. . . ] A mark (s) appears in the box when it has already learned a command. 3 Touch the source that you want to listen to in another room. The 2nd AV output on the receiver changes. 17 Selecting Sound Fields These sections describe how to select and make adjustments to the sound fields. For details concerning sound fields, please refer to the operating instructions supplied with the receiver. SOUND FIELD screen hierarchy EQ BANK Displaying the SOUND FIELD screen Touch SOUND FIELD. SOUND FIELD Operation The SOUND FIELD screen appears. The SOUND FIELD screen hierarchy is shown on the right. Sound Field Mode SETUP EQ EDIT LEVEL SURR EDIT 18 Selecting the sound field For details concerning which sound fields can be selected, please refer to the operating instructions supplied with the receiver. Selecting the equalizer 1 2 Touch SOUND FIELD. A check ( ) will appear next to the selected equalizer, and the equalizer settings will change. 1 2 3 4 Touch SOUND FIELD. Push the JOG DIAL to select the highlighted sound field or touch the sound field you desire. A check ( ) will appear next to the selected sound field, and the sound field will change. Operation Selected equalizer Cursor Selected sound field Note Cursor If EQ OFF is selected, EQUALIZER screen settings cannot be changed. 19 Adjusting Sound Fields Set up the SOUND FIELD screen menus to fully enjoy the surround sound created by the sound fields. On the EQ EDIT screen, adjust the frequency bands of front, center and rear speakers of the equalizer preset (EQ PRESET 1~5) that you selected on the EQ BANK screen. Adjust various aspects of individual sound fields on the SURROUND screen. Adjust the output level of each speaker and perform a variety of other adjustments to control the sound mix on the LEVEL screen. CUSTOM allows you to customize other operations that the receiver performs. For details on what can be adjusted, refer to the operating instructions supplied with the receiver. Set speaker configuration, size and distance from the main listening position on the SETUP screen. Adjusting the frequency bands 1 Touch EQ EDIT on the SOUND FIELD screen. The EQUALIZER screen of the equalizer preset selected in the EQ BANK screen appears. If EQ OFF is selected in the EQ BANK screen, EQUALIZER screen items are all grayed out, and edit functions cannot be performed. Scroll the JOG DIAL to select an item or touch the item you want to adjust. Output speaker BASS: low range MID: mid range TREBLE: high range GAIN: gain adjustment FREQUENCY: frequency adjustment RANGE: range adjustment SLOPE: slope adjustment 2 3 Operation The current EQ BANK number 4 5 6 Touch value. or to adjust to the desired Repeat steps 2 through 4 when there is more than one item that you wish to adjust. Touch EXIT when adjustment is finished. Notes · Items that cannot be adjusted due to the current speaker settings or sound field mode are grayed out. · If the alarm sounds, or all items appear to be grayed out, touch RELOAD. 20 Adjusting the surround parameters Adjusting the speaker levels 1 Touch SURR EDIT on the SOUND FIELD screen. The SURROUND screen appears. 1 Touch LEVEL EDIT on the SOUND FIELD screen. The LEVEL screen appears. Operation 2 3 4 Use the JOG DIAL or touch 4 or $ to scroll through the list. Scroll the JOG DIAL to select an item or touch the aspect you want to adjust. or to adjust to the desired 2 3 4 5 6 Use the JOG DIAL or touch 4 or $ to scroll through the list. [. . . ] If the above procedure is not completed, the settings, such as the sound field name, in the commander may differ from those in the receiver. 30 Additional information Precautions during use On installment Do not drop the commander or subject it to strong vibration as this could cause damage. On the touch pen Use only the touch pen provided with this unit or the soft tip of your finger to operate the touch panel. Using a commercially available writing utensil may damage the panel and make correct operation impossible. If the tip of the touch pen is damaged, or the touch pen is lost, please consult your nearest Sony dealer. [. . . ]