User manual SONY RM-LJ302

[. . . ] 3-866-295-12(1) Remote Commander Operating Instructions RM-LJ302 © 1999 by Sony Corporation Precautions On safety Should any solid object or liquid fall into the cabinet, unplug the receiver and have it checked by qualified personnel before operating it any further. Before You Use Your Remote Check that you received the following item with the remote: LR6 (size-AA) alkaline batteries (3) On operation Before connecting other components, be sure to turn off and unplug the receiver. Inserting batteries into the remote Insert three LR6 (size-AA) alkaline batteries with the + and ­ properly oriented in the battery compartment. When using the remote, point it at the remote sensor on the receiver. On cleaning Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine. If you have any question or problem concerning your receiver, please consult your nearest Sony dealer. ] } ] } ] } About This Manual z When to replace batteries The instructions in this manual are for model RM-LJ302. Check your model number by looking at the lower left corner of the front side. [. . . ] Some items have sub-lists that appear when you press the SUB button (see pages 10 and 11). The configuration of the lists will vary depending on the receiver. VIDEO1 Using the Lists VIDEO2 . TAPE (or TAPE/MD) Deck A/B status information Disc memo list* Preset station list Press CD TUNER PHONO . USER1 USER2 MACRO1 MACRO2 SUB ROOM** FUNCTION Press SOUND FIELD Sound field list IR SET IR SET list MACRO 1/2 list CATEGORY list PROGRAM list MAKER list CATEGORY list MAKER list FUNCTION list Press DOWNLOAD FUNCTION TUNER INFO CD MEMO EXIT SET UP AUTO POWER BACK LIGHT ALL CLEAR * Appears only when the receiver is connected to CONTROL A1/A1 compatible CD changer (5, 50, 200, or 300 discs). ** Depending on the component you are using, this setting may not be displayed. 13 Selecting a Component Basic procedure for selecting a component Do the procedure below to select a component from the function list. Note that the components contained in the list will vary depending on the receiver. Additional procedures after selecting a component If you have selected tuner Do the procedure below after you have selected the tuner. 1 Press FUNCTION. The items in the list correspond with the jacks on the receiver. Using the Lists 1 2 Move the easy scroll key. Move the easy scroll key to select the preset station, then press the key to enter the selection. The current status of the component appears in the display window. CD TUNER PHONO 2 Move the easy scroll key to select a component from the list, then press the key to enter the selection. A display example Note If you have changed the contents of the preset station memory of the receiver, be sure to download the preset station memory from the receiver (see page 18) before you tune in to a preset station. < CD > CD Sony Selected component Category Maker of the component If you have selected CD player, tape deck, or MD deck Detailed information about the component appears in the display window of the remote only if the component is compatible with CONTROL A1/A1 . The information that appears is as follows: If you have selected CD player MD deck tape deck, CD player, or MD deck z You can modify the components displayed You can display the index name for the component. For details, see "Downloading Data From the Receiver" on page 18. The following information appears The first 12 characters of the disc memo, track number, and track text The first 12 characters of the disc name, track number, and track name The current deck operation ((, P or p) to the right of the component indication z You can modify the category indication The category indication tells you what component is actually connected to the jacks on the receiver. If a component is connected to jacks for which they are not originally meant, you can modify the category indication to match the component. For details, see "Programming the Remote" on page 15. If you selected a Sony CD changer z You can turn components on automatically You can set the remote to automatically turn on a component when it is selected from the function list. For details, see "Using the auto power function" on page 20. 1 2 Move the easy scroll key. Move the easy scroll key to select a disc, then press the key to enter the selection. Start playback. Depending on the component that you selected, you may have to do an additional procedure, or you may be able to obtain detailed information about the component by doing an additional procedure. For details, see "Additional procedure after selecting a component" on this page. 3 Note If you have changed the discs in the changer, be sure to download the CD memos from the receiver (see page 18) or play the newly inserted disc(s) before you select a disc from the changer. 14 Selecting a Sound Field If you selected the tape deck Move the easy scroll key to display the information about deck A or B. Note When the remote is programmed to control a non-Sony tape deck, the following may occur: -- The information about deck B is not displayed and you cannot switch between tape deck A and B. -- "TAPE A/B" is displayed and tape deck A and B switch automatically each time you press the easy scroll key, etc. Do the procedure below to select a sound field from the sound field list. Note that the sound fields contained in each list will vary depending on the receiver. 1 Press SOUND FIELD. Using the Lists Stadium Game Jazz 2 Move the easy scroll key to select the sound field, then press the key to enter the selection. The display reverts back to the component information after about ten seconds. [. . . ] Set the COMMAND MODE selector on the back panel of the non-compatible CD player to "CD1" and set the category in the IR SET list for the player to "CD1" (see page 16). Before downloading CD memos from the CONTROL A1/ A1 -compatible CD player, temporarily change the category setting of the non-compatible CD player to some other category ("VideoCD, " for example). After downloading is completed, set the category setting of the non-compatible CD player to "CD1" again. When using a non-Sony CD player in conjunction with Sony CD players Program the remote to control the non-Sony CD player (see page 16). See the sections above for settings of the Sony CD players. 19 Other Operations Turning the backlight on or off Each time you press a button on the remote, the backlight turns on. [. . . ]