User manual SONY RDR-GX220

[. . . ] Please ensure you have the following information available before calling the helpline: Date of purchase: Serial number: Model number: Post code: Detailed fault description: Signal strength and signal quality: This label is located on the laser protective housing inside the enclosure. Notice for customers in the United Kingdom and Republic of Ireland A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS1362, (i. If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. [. . . ] During Synchro-Recording, other operations such as normal recording cannot be done. To use the connected equipment while the recorder is standing by for Synchro-Recording, cancel SynchroRecording by pressing SYNCHRO REC. Be sure to turn off the connected equipment and press SYNCHRO REC to reset Synchro-Recording before the timer recording starts. While the recorder is standing by for SynchroRecording, the Auto Clock Set function (page 74) does not work. Regardless of whether or not the programme is a Synchro Rec programme, the programme that starts first has priority and the second programme starts recording only after the first programme has finished. 7:00 First programme Second programme will be cut off At the same time, press X REC PAUSE on this recorder and the pause or play button on the connected equipment. Z Hint You can adjust the settings for the recording picture before recording. Any programme that contains a Copy-Never copy guard signal cannot be recorded. The recorder continues to record, but a blank screen will be recorded. Recording from connected equipment without a timer You can record from a connected VCR or similar device. Press INPUT SELECT to select an input source according to the connection you made. To reset either point A or B, select "Change A" or "Change B, " and go to step 2 or 3. The scene is erased, and the display asks whether to erase another scene. The chapter mark divides the title into separate chapters on either side of the mark. Images or sound may be momentarily interrupted at the point where you erase a section of a title. For DVD+RWs, the erased section may be slightly different from the points you selected. You can select and erase more than one title at one time using the TOOLS menu. When recording on a DVD+RW or DVD-RW (Video mode), the recorder searches for the largest open space and records there. Before you start, check the disc status by using Disc Map, and erase titles to create a space large enough for the recording. When b or B appears on either side of the screen, you can scroll sideways by pressing To erase more titles, repeat step 3. Playlist edit allows you to edit or re-edit without changing the actual recordings. Once you create a Playlist title from original titles, you will be unable to erase or edit the original titles. [. . . ] Buttons with an orange dot next to them can be used with your TV when the TV/DVD switch is set to TV. Playing time/remaining time Current title/chapter/track/index number Recording time/recording mode Clock Programme position TV Direct Rec indication (28): "TV" appears in the right most two digits. " z Hint You can turn off the front panel display when the recorder is turned off by setting "Dimmer" to "Power Save" in "Options" setup (page 85). Sections of a picture or a music feature that are smaller than titles. [. . . ]