User manual SONY MZ-E20

[. . . ] Hold down PLAYMODE until "­ ­ ­" in the display. Within 5 seconds, turn the control repeatedly until the name or number of the desired group appears. The player can store two sets of treble-bass adjustments, which can set be selected later during playback. A Track number Track number The number of total Group name tracks in the group The number of total tracks Track number z The group name appears when you select the group on group skip mode. [. . . ] When group mode is off: Disc Track number Disc name Track number Group name Separator between group names Separator between track number and Group name Settings cannot be changed using the operation buttons on the player. ⷠWhen using a digital sound preset, the sound may break or become distorted if the volume is turned up too high, depending on the settings or the track. This is a disc with settings that organize tracks into groups, and which allow those groups to be selected. Use your MD recorder to record group information, and then use the MZ-E20 for playback. Disc Group 1 Track number Group 2 Track number Group 3 Track number How to use the control on the remote control Playback: Turn the control towards N> while the player is stopped. On the player) during the first track of the disc, the player goes to the beginning of the last track on the disc. If you turn the control towards N> on the remote control (or press > N on the player) during the last track of the disc, the player goes to the beginning of the first track on the disc. If you open the lid, the playback will begin from the beginning of the first track (except when disc information is stored to the personal disc memory or when group mode is on). The settings are entered and playback starts from the first programmed track. ) Set the following groups for the disc named "Collections ": Group name for tracks 1-7: My Favorites"2001winter" Group name for tracks 8-17: Jun&Tac"sunshine head" Group name for tracks 18-24: THE NIGHT BUTTERFLYS Group name for tracks 25-32: Dream World/Kiss Me! 80% 100% 110% The playing speed can be set at 80% to 110% normal speed, in seven steps of 5% each. (If you press any of the operation buttons on the player, "HOLD" flashes on the remote control. When the remote control is enabled for settings ("MENU" appears on the remote control when a button on the player is pressed. B Take the MD out and wait for several hours until the moisture has evaporated. ⷠThe rechargeable battery or dry battery is weak ("LOW BATT" flashes on the remote control). While operating, the player received a mechanical shock, too much static, abnormal power voltage caused by lightning etc. ) b Press RPT/ENT on the remote control repeatedly until " " disappears, then start playing. ⷠThe disc stopped playing before reaching the last track. B Turn and hold the control towards N> for 2 seconds or more to start playing from the first track. B Turn off group mode and stop playback, then turn and hold the control towards N> for 2 seconds or more to start playing from the first track. Strong magnetism from a television or other device causing interference. B Because of the nature of the compression method used in LP4 mode, noise may be output on very rare occasions during playback of sound recorded in this mode. [. . . ] If you try to erase the disc information of a disc that has never been stored, "No Entry!Any settings stored thereafter will replace the settings for the MD with the oldest playback date. ⷠIf you use another minidisc recorder to edit or add tracks to a disc whose settings have been stored on the player, the disc will no longer be recognizable by the player and the stored information will become useless. The timer will begin counting from the moment you select "ON" in step 3. [. . . ]