User manual SONY MHC-RXD7

[. . . ] Don't throw away the battery with general house waste, dispose of it correctly as chemical waste. Note on power cord plug shapes (Saudi Arabian model only) (The 13 A 3-pin plug is attached when shipped from the factory. 38 (MHC-GN999D/MHC-GN999DS/ MHC-GNZ88D/MHC-GNZ77D* only) * Russian model only Using the on-screen display to search for a title/chapter/scene/track/ index/album/file . 23 -- Normal Play Resuming playback from the point you stopped the disc . [. . . ] The resume playback point can be stored in the memory for up to 40 different DVD VIDEOs or VIDEO CDs (page 26). Playback starts at the resume playback point only for the current disc in the system. To return to the default setting when changing a setting press CLEAR before you press ENTER. However, note that you cannot return the setting of "SIZE" to default setting. You cannot perform SPEAKER SETUP when you connect headphones or microphone to the unit. Reproduce the sound track with the kind of dynamic range that the recording engineer intended. To obtain the best possible surround sound, set the size of the speakers you have connected and their distance from your listening position. Then, use the test tone to adjust the level of the speakers to the same level. When you connect or disconnect the center speaker, surround speakers or subwoofer or when you move the surround speakers, change the setting for CENTER, SURROUND and SUBWOOFER. Depending on the settings of other speakers, the subwoofer may output excessive sound. When you play back a DVD VIDEO that does not have subwoofer output recorded, no sound is output from the subwoofer, even if "SUBWOOFER" is set to "YES". Adjusting the speaker level by using the test tone Speaker level for other speakers. When you adjust the speaker settings, the sound may cut off for a moment. Press V or v repeatedly to adjust the level from your listening position. 10 Press ENTER when you have finished 11 Repeat steps 8 to 10 to adjust the Speaker level for other speakers. You can then tune in any of those stations simply by selecting the corresponding preset number. You can automatically tune in all of the stations that can be received in your area and then store the frequency of your favourite stations manually. Press and hold TUNING +/­ until the frequency indication starts to change and then release. "AUTO" lights up in the display when the system starts scanning for a station. Scanning stops automatically and "AUTO" disappears from the display when a station is tuned in. When a FM stereo program is tuned in, "STEREO" lights up in the display. If "TUNED" does not light up and the scanning does not stop Set the frequency of the radio station you want as described in step 2 of "Manual tuning preset". [. . . ] Various angles, or viewpoints of the video camera, for a scene are recorded on some DVD VIDEOs. Several languages for the sound or subtitles in a picture are recorded on some DVD VIDEOs. Compared to the Interlace format that alternately shows every other line of an image (field) to create one frame, the Progressive format shows the entire image at once as a single frame. This means that while the Interface format can show 25/30 frames (50/60 fields) in one second, the Progressive format can show 50/60 frames in one second. [. . . ]