User manual SONY MHC-RXD5

[. . . ] "DOLBY" and the double-D symbol a are trademarks of Dolby Laboratories Licensing Corporation. US and foreign patents licensed from Dolby Laboratories Licensing Corporation. Checking your model number Before you read this manual, check your model number by looking at the front of the amplifier. Any differences in operation are clearly indicated in the text, for example, "DHC-MD77 only. [. . . ] The MD deck starts storing audio data when the deck is in recording pause and you start playing the source. With less than 2 seconds of playing of the source and audio data stored in the buffer memory, Time Machine Recording starts with less than 2 seconds of audio data. Making a space between tracks 3 seconds long The Smart Space and Auto Cut functions let you make a blank space between tracks three seconds long automatically while making a digital recording. When "Smart Space" appears during recording, the Smart Space function is activated. There has been an extended silence of 4 to 30 seconds while digital recording. The MD deck replaces the silence with a blank of about 3 seconds and continues recording. Note that the tracks before and after this three-second space may be recorded as a single track with a single track number. If you turn the power off or disconnect the AC power cord, the MD deck will recall the last setting (on or off) of the Smart Space and Auto Cut functions the next time you turn the power on. The MD deck replaces the silence of 30 seconds with a blank of about 3 seconds and changes to recording pause. The Smart Space and Auto Cut functions are both turned on at the same time. When you record from this system's CD (digital recording), the track numbers are automatically marked. By using the Move Function, you can change the order of any track on the disc. You can use this function to add track numbers to multiple tracks that are recorded as one track. This function also lets you mark track numbers after the recording ends. The total number of tracks increases by one and all the tracks following the divided ones are renumbered. 2 While monitoring the sound, turn SELECTOR to the starting point to be divided. You can check the display and shift the point between ­128 and +127 (±01 is about 0. "Complete" appears for a few seconds and the newly created track begins playing. The new track will have no track title even if the original track was labeled. Press EDIT/NO repeatedly until the selected track number and "2 Divide ?This function lets you put several tracks or several independently recorded portions into a single track. The total number of tracks decrease by one and all the tracks following the combined ones are renumbered. [. . . ] The indicators on the DAILY and REC buttons do not light even if you press them. Move the microphone away from the speakers or change the direction of the microphone. Remove the MD and leave the system turned on for several hours until the moisture evaporates. The power cord was unplugged or a power interruption occurred during recording. [. . . ]