User manual SONY MHC-RX70

[. . . ] Refer to them whenever you call upon your Sony dealer regarding this product. To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] Playing the CD tracks in random order â­Â­ Shuffle Play You can play all the tracks on one CD or all CDs in random order. Press PLAY MODE repeatedly until "SHUFFLE" or "PROGRAM" disappears from the display. You can start Shuffle Play during normal play by pressing PLAY MODE repeatedly to select "SHUFFLE". â· To skip a track, turn the jog dial clockwise (or press + on the remote). Press FUNCTION repeatedly until "CD" appears in the display, then place a CD. You can make a program of up to 32 tracks from all the CDs in the order you want them to be played. "STEP" and the programmed playing order appear, followed by the total playing time. Note that you cannot use Tape Select Edit for discs containing more than 20 tracks. Repeat steps 5 and 6 for tracks from the same disc or steps 4 to 6 for tracks from another disc to program the remaining tracks to be recorded on side B. The required tape length for the currently selected CD appears, followed by the total playing time and tracks for side A and side B. In order to use this function, you must first erase the program (see "To clear the entire program" on page 22). Press PLAY MODE repeatedly until "PROGRAM" or "SHUFFLE" disappears from the display. With the flash function, you can "flash" the CD sound during playback. Playback at the point you want to start the Loop function, and release to resume normal play. to adjust the loop length Turn the jog dial while holding LOOP (or press MUSIC MENU B or b while holding LOOP on the remote) to select different loop lengths (LOOP 1~20). Playback at the point you want to start the Flash function, and release to resume normal play. to adjust the flash length Turn the jog dial while holding FLASH (or press MUSIC MENU B or b while holding FLASH on the remote) to select different flash lengths (FLASH 1~20). To use LOOP and FLASH together The loop and flash length cannot be adjusted during this operation. To record the flash effect, use the analog (VIDEO/ MD OUT) connections or this unit's tape deck. With the Wave function, you can fluctuate the graphic equalizer automatically. Turn the jog dial while holding WAVE to select a different wave length (WAVE 1~10). You can reinforce the bass, create a more powerful sound, and listen with headphones. [. . . ] If you have any questions or problems concerning your stereo system, please consult your nearest Sony dealer. Otherwise the tape may get entangled in the parts of the tape deck and become damaged. If you run into any problem using this stereo system, use the following check list. First, check that the power cord is connected firmly and the speakers are connected correctly and firmly. [. . . ]