User manual SONY MDS-JE510

[. . . ] ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. The use of optical instruments with this product will increase eye hazard. ⷠShould any solid object or liquid fall into the cabinet, unplug the deck and have it checked by qualified personnel before operating it any further. Before operating the deck, check that the operating voltage of the deck is identical with your local power supply. [. . . ] Press PLAY MODE repeatedly (or SHUFFLE once) until "SHUFFLE" appears in the display when the deck is stopped. If you turn off the deck or disconnect the AC power cord, the deck will recall the last setting of the Repeat Function the next time you turn on the deck. You can specify tracks during Shuffle Play ⷠTo play the next track, turn AMS clockwise (or press +). ⷠTo play from the beginning of the current track again, turn AMS counterclockwise (or press =). You cannot use AMS (or =) to go to tracks that have already been played. You can program the same track repeatedly You can specify the playback order of the tracks on an MD and create your own programs containing up to 25 tracks. While the track number appears in the display, press AMS as many times as you want. The program remains even after Program Play ends when you press fl (or · ), you can play the same program again. The program created by the Program Play Function is lost when you turn off the deck or disconnect the AC power cord. ⷠThe display shows "- -m - -s" instead of the total playing time when the total playing time of the program exceeds 160 minutes. Press PLAY MODE repeatedly (or PROGRAM once) until "PROGRAM" appears in the display when the deck is stopped. If you turn off the deck or disconnect the AC power cord, the deck will recall the last setting of the Auto Space and Auto Pause Functions the next time you turn on the deck. You can erase a track simply by specifying the respective track number. When you erase a track, the total number of tracks on the MD decreases by one and all tracks following the erased one are renumbered. Since erasing merely updates the TOC, there is no need to record over material. To avoid confusion when erasing multiple tracks, you should proceed in order of high to low track number to prevent the renumbering of tracks that have not been erased yet. While the deck is stopped, press EDIT/NO repeatedly until "All Erase ?When the disc name, all recorded tracks, and titles on the MD have been erased, "Complete" appears for a few seconds and the music calendar disappears. Turn AMS until the track number you want to erase appears in the display. When the track selected in Step 1 has been erased, "Complete" appears for a few seconds and the total number of tracks in the music calendar decreases by one. If you erase a track during playback, the track following the deleted track begins playing afterwards. By using the Divide (see page 22), Erase (see page 20) and Combine (see page 23) Functions, you can erase specific portions of a track. [. . . ] The correct recorded/playing time may not be displayed during playback of monaural-format MDs. /The currently selected CD player type (CD player or Video CD player) does not match the CD player being used. If you experience any of the following difficulties while using the deck, use this troubleshooting guide to help you remedy the problem. /Strong magnetism from a television or a similar device is interfering with operations. [. . . ]