User manual SONY KV-29LS60E

[. . . ] Even if your TV is turned off, it is still connected to the AC power source (mains) as long as the power cord is plugged in. Unplug the TV before moving it or if you are not going to use it for several days. The 1 (standby) indicator flashes green for a few seconds when turning on the TV. When you turn on your TV for the first time, the " a" ("Initial Setup") menu will appear. [. . . ] To select quickly, press and hold until the desired program number appears. If the stereo sound is noisy when receiving a stereo program, select "Mono". For program numbers 10 and above, enter the second digit within two seconds. Ql Select sound mode options with a 5-Band Graphic Equalizer display: (KV-AW21M91A only) "Dynamic", "Standard", "Custom"* (see J). * When the "Custom" mode is selected, you can receive the last adjusted sound settings from the "Sound Adjustment" option in the menu. * When the "Custom" mode is selected, you can receive the last adjusted picture settings from the "Picture Adjustment" option in the menu. Set TV to turn on automatically according to the desired period of time (Wake Up Timer) (max. If no buttons or controls are pressed for more than one hour after the TV is turned on using the wake up timer, the TV automatically goes into standby mode. Set TV to turn off automatically according to the desired period of time (max. If there is no Teletext broadcast, only "100" is displayed at the top left corner of the screen. Enter the Teletext page number that you want to refer to, then press . The 5-Band Graphic Equalizer feature allows you to adjust sound frequency settings of "Custom" mode in the menu. Make sure that "Adjust" is selected, then press Selecting "Reset" will set your TV to the factory settings. Press B or b to select the desired sound frequency, then press V or v to adjust the setting and press . The adjusted settings will be received when you select "Custom". Adjusting higher frequency will affect higher pitched sound and adjusting lower frequency will affect lower pitched sound. (a) If you wish to keep the channels in the current condition, press WEGA GATE to exit. (b) Press V or v to select the program number with the channel you wish to change. (c) If you wish to store the channels in a different order: (1) Press b to enter sorting mode. (2) Press V or v to select the new program number position for your selected channel, then press B. Press b until the mode that you wish to edit is highlighted: Label, Skip, (block symbol). If you preset a blocked program number, that program number will be unblocked automatically. [. . . ] (2) Press V or v until the sound becomes normal, then press If you are not satisfied with the picture and sound quality, you may be able to improve them by using the "Fine" tuning feature. (3) Press V, v, B or b until the picture and sound quality are optimal, then press The + or ­ icon on the menu flashes while tuning. If the TV signal is too strong (picture distorted; picture with lines; signal interference) or weak (snowy picture), you may be able to improve the picture quality by setting the "Signal Booster" feature. (2) Press V or v to select either "Off" (for picture distorted; picture with lines; signal interference) or "Auto" (for snowy picture), then press . [. . . ]