User manual SONY KV-29FX30E

[. . . ] For better TV reception and recording with clear video picture, connect an outdoor aerial to your video TV. You should preset the channels (up to 60 channels) by choosing either the automatic or manual method. The automatic method is easier if you want to preset all receivable channels at once. Use the manual method if you want to allocate programme numbers to the channels one by one. [. . . ] To reactivate automatic finetuning (AFT) Repeat from the beginning and select "ON" in step 5. You need to set the clock for using timer recording and quick-timer recording functions. 5 Using + or ­ and OK, set the month, year, hour and minute in the If you have made a mistake Press ?If power is interrupted or you disconnect the mains lead for more than one day You have to re-set the clock. This section explains the basic functions you use while watching the TV. The video TV enters standby mode and the u lamp on the front of the video TV lights up in red. To switch off the main power Disconnect the mains lead from a wall outlet. To select a double-digit number using the number buttons For example, if you want to choose 14, press ÷ To resume normal sound, press ¤ again or Á +. To have the programme number and caption stay on the screen, press e again. To make the indications disappear, press e until no indications are displayed on the screen. Setting PICTURE CONTROL STANDARD MILD MOVIE Picture effect The adjusted picture control levels are stored. 4 Press OK, then set the hour of the recording start time to "20" with + or Press OK, then set the minute of the recording start time to "15" with + or ­ . Press OK, then set the hour of the recording stop time to "21" with + or ­ . Press OK, then set the minute of the recording stop time to "55" with + or ­ . Press OK, then set the programme position to "26" with + or ­ . 10 When you want to set other programmes, press ­ to move down the If you have made a mistake during timer setting Press ?If you try to enter the recording start time prior to the current time All the items of the setting will be erased. If you try to do incorrect operation The video TV displays a message on the screen to interrupt your setting. The TIMER REC lamp on the front of the video TV lights up and the video TV enters timer recording standby mode. The video TV turns on automatically and starts recording at the preset start time, and goes off at the preset stop time. You can preset your video TV to record the same programme every day of the week (daily recording) or the same programme on the same day every week (weekly recording). Press ­ in step 3 until the desired setting appears in the "DATE" position. [. . . ] If you do not press any button for 2 hours, the video TV automatically shuts off. If streaks or snow noise appear on the video playback picture, adjust the tracking condition manually. To go back to automatic tracking Select AUTO in the TRACKING CONTROL menu with + or ­ and press OK. This function allows you to improve playback and recording quality by adjusting the system parameter automatically according to the condition of the video tape. [. . . ]