User manual SONY KLV-S26A10

[. . . ] 2-589-826-13(1) LCD Color TV Operating Instructions KLV-S19A10 KLV-S23A10 © 2005 Sony Corporation KLV-S26A10 KLV-S32A10 Owner's Record The model and serial numbers are located at the rear of the TV. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. Serial No. Contacting Sony If, after reading these operating instructions, you have additional questions related to the use of your Sony TV, please call our Customer Information Services Center at 1-800-222-SONY (7669) (US residents only) or 1-877-899-SONY (7669) (Canadian residents only). 2 WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Declaration of Conformity Trade Name: SONY Model: KLV-S19A10/KLV-S23A10/ KLV-S26A10/KLV-S32A10 Responsible Party: Sony Electronics Inc. Telephone Number: 858-942-2230 This device complies with part 15 of the FCC rules. [. . . ] If you prefer, you can connect the camcorder to the TV's rear A/V input jacks. To connect a camcorder or "PlayStation" Use an A/V and S VIDEO cables to connect the camcorder or "PlayStation" AUDIO and S VIDEO output jacks to the TV's AUDIO and S VIDEO input jacks (VIDEO 2) on the left side of panel. If your camcorder is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable. If you have a mono camcorder, connect its audio output jack to the TV's L MONO audio input jack. "PlayStation" Camcorder Left side of TV Connecting the TV VIDEO 2 IN S VIDEO VIDEO (yellow) AUDIO-L (white) AUDIO-R (red) or S VIDEO VIDEO L(MONO) AUDIO R To S VIDEO jack To A/V output jack S VIDEO cable A/V cable Notes on Using This Connection To Do This . . . Do This . . . Watch the camcorder or "PlayStation" Label video inputs to easily identify equipment connected to the TV Press WEGA GATE to select the camcorder or game input (Video 2) in the External Inputs list. or Press TV/VIDEO repeatedly to select the camcorder or game input (Video 2). See the instructions for setting up Label Video Inputs on page 61. 29 Connecting the TV Setting Up the Channel List After you finish connecting your TV, you need to run Initial Setup, which automatically sets up available channels. The Initial Setup screen appears when you turn on your TV for the first time after hooking it up. If you do not want to set up the channels at this time, you can do it later by selecting the Auto Program option in the Channel settings (see page 53). The Auto Program feature does not apply for installations that use a cable box. For antenna connections, run the Auto Program again after selecting Cable Off from the settings. Using Initial Setup To run Initial Setup the first time you turn on your TV 1 Press POWER to turn on the TV. The Initial Setup screen appears. 2 Press V or v to select the on-screen display language. Then press The message "First please connect cable/antenna" appears. By default, Auto Program is set to scan cable TV channels. . 3 Press CH + to start Auto Program. Auto Program automatically creates a list of receivable channels. When all the receivable channels are stored, the Show/Hide Channels settings appear. To scan available VHF/UHF antenna channels instead of the cable TV channels 1 Select Settings in WEGA GATE, then go to Channel settings. 3 Start Auto Program by pressing CH +. To perform Auto Program again, follow the above instructions. Depending on your signal source, be sure to set Cable to On or Off accordingly (see page 53). The Initial Setup menu will appear each time the TV is turned on until you complete the scanning for the available channels. 30 Watching the TV Button Descriptions Button Description MTS/ POWER MUTING DISPLAY SAP POWER SAVING FREEZE TV/ VIDEO 1 MUTING 2 DISPLAY 1 2 3 4 5 6 3 POWER SAVING RETURN WEGA GATE 4 FREEZE 7 8 FUNCTION F1 5 JUMP 9 F2 6 RETURN 7 WEGA GATE 8 FUNCTION Buttons 9 DVD/VCR Operating Buttons 0 qa qs TOP MENU MENU GUIDE SLEEP MODE SOUND PICTURE WIDE TV/SAT z The 5 button, CH + button, N (Play) button and MTS/SAP button have a tactile dot. Use them as a reference when operating the TV. 0 TOP MENU qa MENU qs VOL +/­ Press to mute the sound. Press once to display the current channel number, channel label, time and Wide Mode settings. The OSD (on screen display) will be canceled after a few seconds or press again to immediately cancel the display. Press repeatedly to cycle through the power saving modes: Standard, Reduced, Picture Off. The current program appears in the sub screen when freeze is selected. You can use this feature to write down information such as phone numbers, recipes, etc. The TV alternates between the current channel and the last channel that was selected. When FUNCTION is switched on DVD/VCR, these buttons operate the video equipment you have programmed into the remote control. See "Using Other Equipment with Your Remote Control" on page 36. m Rewind N Play M Fast forward X Pause x Stop z Record Press to display the top menu of your DVD/VCR. [. . . ] Double images or ghosts. 62 Other Information Problem Possible Remedies Only snow and noise appear on the screen. (3-5 years in normal use, 1-2 years at the seaside. ) Keep the TV away from noise sources such as cars, motorcycles, or hairdryers. Make sure that the antenna is connected using the supplied 75-ohm coaxial cable. Press MUTING or VOL + so that "Muting" disappears from the screen (page 32). [. . . ]