User manual SONY ICF-C26

[. . . ] To ensure reliable operation of the appliance, and to protect it from overheating, these slots and openings must never be blocked or covered. -Never block the slots and openings by placing the appliance on a bed, sofa, rug or other similar surface. -Never place the appliance in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided. Accessories Do not place the appliance on an unstable cart, stand, tripod, bracket, or table. The appliance may fall, causing serious injury to a child or an adult, and serious damage to the appliance. [. . . ] If you have any questions about this product, you may call: Sony Customer Information Services Center 1-800-222-7669 or write to: Sony Customer Information Services Center 12451 Gateway Blvd. , Ft Myers, FL 33913 Declaration of Conformity Trade Name: SONY Model: ICF-C26 Responsible Party: Sony Electronics Inc. Address: 680 Kinderkamack Road, Oradell, NJ 07649 USA Telephone Number: 201-930-6972 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. CAUTION The use of optical instruments with this product will increase eye hazard. -For the appliance with a polarized AC power cord plug: This plug will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to have a suitable outlet installed. Do not defeat the safety purpose of the polarized plug by forcing it in. -For the appliance with a three-wire grounding type AC plug: This plug will only fit into a grounding-type power outlet. If you are unable to insert the plug into the outlet, contact your electrician to have a suitable outlet installed. Do not defeat the safety purpose of the grounding plug. Overloading Do not overload wall outlets, extension cords or convenience receptacles beyond their capacity, since this can result in fire or electric shock. When not in use Unplug the power cord of the appliance from the outlet when left unused for a long period of time. Never pull the plug out by the cord. Power-Cord Protection Route the power cord so that it is not likely to be walked on or pinched by items placed upon or against them, paying particular attention to the plugs, receptacles, and the point where the cord exits from the appliance. 2004 Sony Corporation Printed in China Lightning For added protection for this appliance during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. · After 20 minutes, playback will be stop when you press CD u during play back. Hold down the PRESET TUNING button you wish to preset until you hear two short beeps. Example: Display window when you preset FM 90 MHz in the PRESET TUNING 2 button for FM2. To Set the Buzzer Alarm: 1 Press ALARM SET BUZZER for a few seconds. "ALARM" and "BUZZER" appear on the display. After one beep, "ALARM" and the hour will start to flash on the display. " " and the NAP time is displayed for a few seconds. When the selected NAP time has passed, a beep " appears in the display. sounds, and " To Stop NAP Timer Press NAP or OFF x·ALARM RESET to turn off the buzzer. 2 Press TUNE/TIME SET + or ­ until the desired hour appears. To set the hour rapidly, hold down TUNE/TIME SET + or ­. The frequency remains on the display for about 10 seconds and then returns to the previous display. To change the preset station, tune into the desired station and hold down the PRESET TUNING 1 to 5 button. The new station will replace the previous station on the PRESET TUNING button. To Deactive NAP Timer Press NAP. " 3 4 Press ALARM SET BUZZER. The minute will flash. Various Modes of CD Playback You can play tracks repeatedly or in random order. Each press changes the play mode as follows: Repeat step 2 to set the minute and press ALARM SET BUZZER. Two short beeps will confirm the setting. Setting the Sleep Timer You can fall asleep to the CD or the radio using the built-in sleep timer to turn off the CD or the radio automatically after a preset duration. You can set the sleep timer to durations of 90, 60, 30, or 15 minutes. Every push changes the display as follows: off (current time) 15 90 30 60 Display Indication none The CD u button has a tactile dot. Play mode (normal play) Tuning into a Preset Station 1 Press RADIO·BAND to turn on the radio. 3 Press the desired PRESET TUNING button. To Set the Alarm Mode Before setting the alarm mode, be sure to set the alarm time. [. . . ] The display shows the date or year for a few seconds and then changes back to the current time. In step 5, when you press CLOCK after the minute setting to activate the clock, the seconds start counting from zero. To change the display to the daylight saving time (summer time) indication Press D. S. T. /SUMMER T. " " is displayed and the time indication changes to summer time. [. . . ]