User manual SONY ICF-C50L

[. . . ] Each time you press SLEEP, the sleep timer indication changes as follows. If the reception has not changed, you do not have to set the clock again. [. . . ] " " will appear and the time indication changes to the summer time. Counting starts when the number at the upper righthand corner of the display (for the first time) changes to 1. United Kingdom: 12 hour display; AM 12:00 = midnight Other Countries: 24 hour display; 0:00 = midnight Press TIME SET + or ­ until the correct number appears in the display. After setting the minute, press and release CLOCK to start the counting of the seconds. 675g (1 lb 8 oz) Design and specifications subject to change without notice. If you stop during the clock setting , after about a minute the previous display will return. ⷠTo set the current time exactly to the second, release the CLOCK with the radio or telephone time signal at step 4 (above). Should any problem occur with the unit, make the following simple checks to determine whether or not servicing is required. The clock auto adjust function does not operate and the clock display is stopped at 10:00. Rotate the unit horizontally or place the radio where the reception is better. There was a service interruption for more than 10 minutes, the alarm settings and clock settings has been resetted. To improve reception When the reception is poor, set the FM and Clock Auto Adjust antenna to a place and angle where the reception is much more stronger. [. . . ] The radio or buzzer will shut off but will automatically come on again after about 8 minutes. ⷠYou can reset the alarm time while activating the snooze function. [. . . ]