User manual SONY CMT-CP2W

[. . . ] Refer to them whenever you call upon your Sony dealer regarding this product. To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] With the side you want to play facing towards you Press DIR MODE on the remote to select " " to record on one side of the tape or " " to record on both sides. You don't need to set Dolby NR, since tape B is automatically recorded with the same Dolby NR setting as tape A. â· To record from the side facing away from you, press TAPE B nN after step 2. Do the procedure below to check the remaining playing time of the current track or the entire CD. The Repeat Play function lets you playback a single track or all the tracks on a CD repeatedly in Normal Play. You can also use Repeat Play function while in Shuffle Play or Program Play. Each time you press this button, the display changes as follows: The following table describes the two repeat modes. To repeat All the tracks on the CD Only the currently playing track Press REPEAT repeatedly until "REPEAT" appears. T Current track number and elapsed playing time of the track r Current track number and remaining playing time of the track r Remaining playing time of the entire CD r Clock display Each time you press DISPLAY while the CD and tape units are stopped, the display changes as follows: t Total playing time* r Clock display r Current source display * It appears only when "CD" is selected. If the CD contains 25 tracks or more, the remaining playing time of the current track will appear as "- - . Playing CD tracks in random order -- Shuffle Play You can use this function to playback all the tracks on a CD in random order. Playing CD tracks in a favorite order â­Â­ Program Play You can make a program of up to 24 tracks on a CD in any order that you want. After setting the order, you can also make a synchronized tape recording of the tracks (see page 21). ";" appears while the next track is being selected, and all the tracks play in random order. You can also start Shuffle Play during Normal Play by selecting "SHUFFLE". Selected track number Total playing time You cannot go back to the preceding track by pressing CD . Playing CD tracks in a favorite order (continued) Do the procedure below to manually record from any source to a tape. For example, tracks from a CD, the radio, or from any of the connected components. Add a track to the end Do steps 3 and 4 with of the program Program Play stopped. The program you made remains in the system's memory until you turn off the system or remove the CD. â· When the total playing time of the programmed tracks exceeds 100 minutes, "- - . If you try to program more than 24 tracks, "PGM FULL" appears in the display. [. . . ] If the problem persists after doing all of the above, consult your nearest Sony dealer. Do not change the tape operations such as play, stop, and fast-winding etc. When the tape heads become dirty -- the sound becomes distorted -- the sound level decreases -- the sound drops out -- the tape does not erase completely -- the tape does not record Make sure to clean the tape heads before making an important recording or after playing an old tape. "c DAILY" and "c REC" do not appear when you press TIMER SELECT on the remote. [. . . ]