User manual SONY CLM-V55

[. . . ] Unplug this apparatus during lightning storms or when unused for long periods Refer all servicing to qualified service personnel. Apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] Do not place this unit in the following locations Regardless of whether this unit is in use or in storage, do not place it in any of the following locations. Placing this unit in locations subject to direct sunlight such as on dashboards or near a heater may cause this unit to deform or malfunction. Locations with excessive vibration Locations with strong electromagnetism Locations with excessive sand In locations such as the seashore and other sandy areas or where dust clouds occur, protect the unit from sand and dust. This unit is a portable LCD monitor for use with an Interchangeable Lens Digital Camera or an Interchangeable Lens Digital HD Video Camera Recorder with an HDMI terminal and live view mode. The following functions help you to see the image more clearly and take better pictures. Wide viewing angle LCD screen Useful functions such as peaking and pixel-by-pixel zoom Moveable shoe adaptor enables easy removal when using a camera that has an auto lock accessory shoe. LCD screen Power lamp When the power is on, this lamp lights up or blinks depending on the status of this unit. (Page 15) Power button Press and hold down to turn this unit on or off. Battery release lever Headphone jack You can connect headphones with a 3. This unit can be powered by a Sony rechargeable battery pack or a Sony AC adaptor. The following Sony rechargeable battery packs (not supplied) can be used with this unit. You cannot use other battery packs because this unit will not work properly with them. Push the battery in gently in the direction shown, then slide it to the left while still pushing. Slide the battery to the right while sliding the battery release lever to the left. When the lamp becomes red, replace the battery pack soon with a fully charged battery pack. Lighting status of the power lamp Green (lit) Green (flashing slowly) White (lit) White (flashing slowly) Red (lit) Red (flashing rapidly) Off Status of this unit Power is on. ¦Notes Do not disconnect or remove the battery or AC adaptor when turning This unit on or off (the power lamp flashes slowly). Just before the battery runs out, the power lamp turns red and flashes rapidly. The power to this unit automatically turns off about 10 seconds later. (When using this unit continuously at 25°C (77 °F) with a brand-new battery attached and connecting to the camera via HDMI) NP-FM500H: Approx. 8 hours * The battery life may differ from the above depending on operation status and environmental conditions. This unit can be powered from the domestic power supply using a Sony AC adaptor such as the AC-PW10AM (not supplied). [. . . ] Problem Cannot remove the battery No power to this unit Cause / Countermeasures The battery lock is not released. Slide the battery release lever to the left to Cannot attach this unit to the camera No image appears on the screen of this unit You are using the wrong type of shoe adaptor. Carry out some camera function such as half-pressing the shutter button to leave power save mode. (Page 19) The shooting image may not be displayed on this unit when using a camera that does not have the live view function. [. . . ]