User manual SONY CDP-M33

[. . . ] To an AC outlet To line output (R) To line output (L) When connecting the audio cord, be sure to match the color-coded cord to the appropriate jacks on the components: Red (right) to Red and White (left) to White. Check that the voltage selector on the rear panel of the player is set to the local power line voltage. If not, set the selector to the correct position using a screwdriver before connecting the AC power cord to a wall outlet. If the player is slanted, it may cause malfunction or damage the player. [. . . ] Only one disc you have selected Turn the JOG dial until the disc number you want appears in the display to select the first disc (ALL DISCS) or the disc you want (1 DISC). The selected disc is set to the playing position, and the player plays all the discs from the selected one (ALL DISCS) or all the tracks once (1 DISC). While playing a disc, the display shows the current disc number, track number, playing time of the track and the next disc number. Next disc number Playing time of the track Pause Resume playing after pause Go to the next track Go back to the preceding track Stop playing and remove the disc Press )± Press 0 Open the front cover, then push the JOG dial. You can quickly locate any track while playing a disc using the 0/)± (AMS: Automatic Music Sensor) buttons. Turn the JOG dial until the disc number you want appears in the display. You can specify the next disc to play while playing a disc in Continuous or 1 DISC Shuffle Play mode. While playing a disc, turn the JOG dial until the disc number you want appears in the display. Next disc number The next or succeeding tracks the current or preceding tracks a point in a track while monitoring the sound a point in a track quickly by observing the display )± repeatedly until you find the track 0 repeatedly until you find the track )± (forward) or 0 (backward) and hold down until you find the point )± (forward) or 0 (backward) and hold down until you find the point during pause. After the current disc is played, the next disc you have specified starts playing. If you want to skip to the next disc right away, push the JOG dial while playing the current disc. When you press PROGRAM during Continuous or Shuffle Play The program remains until you erase them If you replace discs, the programmed disc and track numbers remain. Each time you press this button, the display shows the disc and track number of each step in the programmed order. (When a whole disc is programmed as one step, "AL" appears instead of the track number. ) After the last step in the program, the display shows "End" and returns to the original display. When you insert a disc into the PLUS ONE slot, you can play the disc independently from other discs. When using this function, the player is automatically set to 1 DISC Continuous Play mode. "P1" appears in the display instead of the disc number, and the player starts playing the disc in the PLUS ONE slot. The disc number in the display changes to 51 and you can play the disc as the 51st disc. If you have already inserted a disc into the PLUS ONE slot PLUS ONE Press PLUS ONE while the front cover is closed. You can select Shuffle Play mode during Plus One Play Plus One Play will be canceled if you turn the JOG dial or press buttons to specify the other disc. The PLUS ONE slot comes to the loading position automatically if you open the front cover during Plus One Play. [. . . ] If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the player. In this case, leave the player turned on for about an hour until the moisture evaporates. Do not turn up the volume while listening to a portion with very low level inputs or no audio signals. If you do, the speakers may be damaged when a peak level portion is played. [. . . ]