User manual SONY CDP-497

[. . . ] If you do, the speakers may be damaged when a peak level portion is played. Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine. Before operating the player, check that the operating voltage of the player is identical with your local power supply. [. . . ] CD TEXT discs have information, such as the disc titles or artist names, memorised in a blank space on the discs where, on normal discs, there is no information. The display shows the CD TEXT information of the disc so that you can check the current disc title, artist name, and track title. When the player detects CD TEXT discs, the "CD TEXT" indication appears in the display. If your CD TEXT disc has multi language capacity, "CD TEXT" and "MULTI" indications appear in the display. If you want to check the information in another language, refer to "Checking the information of CD TEXT discs in other languages" on page 8. Each time you press TIME/TEXT (or TIME on the remote), the display changes as shown in the chart below. ⷠBefore you start playing This information also appears when the player locates the track. Press Total number of tracks and total playing time If the remaining time exceeds 100 minutes in Programme Play mode or when the disc has more than 24 tracks, "­ ­ . If a title or name has more than 12 characters, the first 12 characters will light up after the title or name scrolls by in the display. This player can only display the disc titles, track titles, and artist names from CD TEXT discs. You can change the displayed language if your CD TEXT disc has multi language capacity. Setting a new starting point You can move the repeating portion ahead by changing the starting point. 1 Press A ­ B while the player is repeating the specific portion. When you want to restart from the starting point A You can start Shuffle Play while playing You can arrange the order of the tracks on a disc and create your own programme. CDP-497 Last programmed track Total playing time Playing order After one second CLEAR AMS ± If you've made a mistake Press PLAY MODE repeatedly until "PROGRAM" appers in the display before you start playing. Turn AMS ± until the track number you want appears in the display. CDP-497 Total playing time Playing order Track number being programmed When tracks, which aren't numerically consecutive on the disc, are programmed consecutively (i. The programme remains until erased (see page 13) or until you press §OPEN/CLOSE ⷠCDP-XE330 Track number being Total playing time programmed The programme you have created remains even after the Programme Play mode ends or you select another play mode. The total playing time doesn't appear in the display when it exceeds 100 minutes. ⷠIf you programme a track numbered over 24 (or 68 for the CDP-XE330), "­ ­ . ­ ­" appears instead of the total playing time. ⷠ"PROGRAM FULL" (or "FULL" for the CDP-XE330) appears in the display when you try to add a track to a programme which already contains 24 tracks. [. . . ] Fading in or out at the point you want You can set the tape length using AMS ±. Example: When the tape length of one side is 30 minutes and 15 seconds 1 To set the minutes, turn AMS ± until "30" appears in the display, then push AMS ±. 2 To set the seconds, turn AMS ± until "15" appears in the display, then push AMS ±. Press EDIT/TIME FADE repeatedly before you start playing until "T. [. . . ]