User manual SOLAC PV2000

[. . . ] â· Do not connect it until you have verified that the iron's voltage coincides with the voltage used in your house. â· Verify that the plug socket is equipped with a suitable ground connection. [. . . ] If the power lead is damaged, it should be replaced by the manufacturer or by your after-sales service shop or similar qualified personnel to prevent possible hazards. Check whether the garment you are going to iron has a label indicating the ironing temperature. We recommend you classify the garments according to their required ironing temperature and begin with the garments that are ironed with the lowest temperature ( ). Ironing delicate garments at a temperature higher than necessary spoils the fabric and causes burnt residue to stick to the soleplate. Fill the tank with water (no additives) without exceeding the maximum level, using the beaker provided Fig. â· Given the importance of correctly maintaining your iron's steam chamber, we recommend that you follow the instructions below. You have the following options, depending on the hardness of the water in your home. If you do not know the hardness of the water in your home, ask for information from your town council. If you live in an area that has very soft water, you can fill the tank using 100% drinkable mineral water or tap-water. â· If you live in an area that has soft water, you can fill the tank using 100% drinkable mineral water, or fill 50% with tap-water and the other 50% with bottled mineral water. â· If you live in an area that has medium water, you can fill the tank using 100% drinkable mineral water, or fill 75% with tap-water and the other 25% with bottled mineral water. â· Lastly, if you live in an area that has hard water, you can fill the tank with 100% bottled mineral water. [. . . ] â· The Guarantee conditions can be found in the attached booklet World-wide Guarantee. â· Remember that the damages caused by the effect of scale are not covered in the Guarantee. [. . . ]