User manual SOLAC AB2750

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SOLAC AB2750. We hope that this SOLAC AB2750 user guide will be useful to you.


SOLAC AB2750 : Download the complete user guide (2025 Ko)

Manual abstract: user guide SOLAC AB2750

Detailed instructions for use are in the User's Guide.

[. . . ] Never use without the paper bag or the protective filters correctly fitted. Always unplug after use and before cleaning the appliance or changing the filters. Do not pull hard on the cord, and never beyond the red marking indicating the end. [. . . ] Before using the vacuum cleaner, prepare the heads for the surface to be cleaned. The heads can be placed directly on the flexible tube (14) or, for out-of-reach surfaces, fit the telescopic metallic tube (16). The suction brush (17) on these models can be used for all types of floors, carpets, and rugs. We recommend cleaning hard floors, wood and parquet with the fibre brush activated, and cleaning carpets and rugs with the fibre brush hidden. The special brush for PARQUET (18), with natural bristles, can be used for wooden and parquet flooring. This model also incorporates a suction head for narrow spaces, grooves and corners (19), and a head for upholstered surfaces (20). These accessories fit directly onto the flexible pipe (14) or onto the telescopic metal pipe (16). The vacuum cleaner can now be plugged in: To do so, pull out the cord and press the button (10) to switch it on. Suction power can also be adjusted by opening or closing the device on the handle (13). Hold the cord plug in your hand to prevent it from banging against the vacuum cleaner housing. If you wish, use the handle (21) to carry the vacuum cleaner while using it, and to get in to difficult places. When the indicator (6) is completely red, a new paper bag must be installed in the vacuum cleaner. This indicator may show red if something is stuck in the flexible tube or in an attachment. To find out if that is the case, unplug the vacuum cleaner, remove the flexible pipe, and turn the vacuum cleaner on again. [. . . ] Shake the protection filter well, or wash it if very dirty, and allow it to dry completely; refit it when clean. To do so, lift the carry handle (21) and align the tabs on the air outlet filter cover with the holes located in the top of the vacuum cleaner; press down on the filter cover opening button (8) until you hear a click (fig. Model ten posiada take ssawk do trudno dostpnych miejsc, szczelin i naroników(19) oraz kocówk do tapicerki (20). [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SOLAC AB2750




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SOLAC AB2750 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.