User manual SNAKEBYTE WIRELESS RETRO CONTROLLER QUICKSTART

[. . . ] Please pay attention to the correct placement of any batteries in the Remote XS Controller, incorrect polarisation leads to defects which void your product guarantee, render the Remote XS Controller inoperable, and on top may cause a horrible acidic mess. Further more do not mix worn-out old batteries with fresh new ones or batteries of different types. Batteries should not be left in the Remote XS Controller for extended periods of non-use in order to avoid leakage (again: horrible acidic mess, you should keep that in mind. Please also pay attention to the appropriate disposal of drained batteries to protect our valuable environment. [. . . ] The snakebyte Remote XS Controller's advanced motion sensing technology is highly sensitive: there is no need to move it excessively while playing. The Remote XS Controller can be used in vertical position for Wii games that require its pointer functionality, in horizontal position for classic Virtual Console games, and with accessories such as the Nunchuk and the Classic Controller (Nintendo 1st party originals and respective snakebyte accessories). For further information please refer to your Wii console's and the respective game's manuals. Connecting the Motion XS Controller Make sure to feed the wrist strap cord through the connector hook on the Motion XS Controller's cable, ensuring that the plug can not be separated from the main controller Connect the Motion XS Controller plug with the Extension Connector Port on the Remote XS Controller Always wear the controller's wrist strap while playing, effectively taking care That the Motion XS Controller does not get entirely separated from the main controller The Motion XS Controller is equipped with a Power On/Off button that allows you to maintain the wired connection with its respective Wii Remote even when the game does not require or allow the use of Nunchuk extensions. This is especially handy for games like Wii Sports, which requires you to connect and disconnect regular Nunchuks while switching between different sports. Make sure to activate the Motion XS Controller when you intend to use it. Proper use of the Motion XS Controller The Motion XS Controller can not be used on its own, i. It adds another dimension to the gameplay, but only complements the main controller. When using the motion sensing features of the main controller and the Motion XS Controller please make sure not to move too excessively. Make sure not to lose the main controller and Motion XS Controller by only playing with the wrist strap on. Consult your game's manual to find out if the Motion XS Controller is supported. If you don't want to lose your warranty, please refrain from disassembling the controllers ­ there are no user serviceable parts inside anyway. inappro priate handling does invalidate the warranty and leads to malfunctions of the devices. Keep your Remote and Motion XS Controller away from liquids and liquid containers such as vases, bottles, hot baths, jacuzzi tubs, etc. If you still encounter problems that can not be solved by reading the section , , troubleshooting", please contact us: Sunflex Europe GmbH Obere Oese 2­4 58675 Hemer Germany support@snakebyte-europe. Included in delivery Within the package of the snakebyte XS Starter Pack you should find the following items: 1x Remote XS Controller 1x Security Wrist Strap 1x Motion XS Controller 1x this manual If any part is missing or obviously broken please contact your dealer immediately. If there are more than the four mentioned items included ­ congratulations!Synchronisation of the Remote XS Controller In order to use the snakebyte Remote XS Controller with your Nintendo Wii it needs to be synchronised with the console. There are two different ways to synchronise the Remote XS Controller with the console, a permanent (Standard) and a temporary (One Time) mode. In Standard Mode the controller remains synchronised (synced) with the Wii console even when the console is turned off. This setting can only be changed by If you encounter any problems using the snakebyte Motion XS Starter Pack please read this section carefully before contacting our customer support or your dealer. Turn off your Wii console, disconnect the AC adaptor for ten seconds and restart your Wii console. [. . . ] Turn off your Wii console, disconnect the AC adaptor for ten seconds and restart your Wii console. Make sure your Remote XS Controller is either synced in permanent (STANDARD) or temporary (ONE TIME) mode to the console. My game seems to receive input signals although I do not even touch the controller. The snakebyte Wireless Sensor Bar) is placed directly in the line of sight either on top of or below your TV when playing. [. . . ]