User manual SNAKEBYTE WII WIRELESS PACK XS

[. . . ] Your Remote XS Controller's bottom LEDs will start flashing, indicating a successful hardware-handshake of controller and console. Once the LEDs stop flashing one LED should light permanently, indicating the player number of the Remote XS Controller. Repeat the above steps for each Remote XS Controller you would like to use with your Wii console. [. . . ] There is no need to deactivate your Wireless Motion XS by pressing the Sync button or removing the batteries from the battery compartment. If the Motion XS is not used for some minutes it will automatically enter sleep mode. You just need to press any button to reactivate the Wireless Motion XS. In certain cases you might have to carry out the synchronisation process again (e. Consult your game's manual to find out if the Wireless Motion XS needs to be used. The Wireless Motion XS Controller can also be used with rechargeable batteries. It is recommended to use it with regular high quality Alkaline batteries for optimal playing time per set of batteries, but the use of NiMH rechargeable batteries is possible. Your Wireless Motion XS Controller allows you to recharge the NiMH batteries by connecting the controller to a USB port of your choice using a USB cable (type A ­ type mini B) to the USB charging port at its bottom. Under all circumstances make sure that the controller is not connected to any USB port while it is equipped with regular Alkaline batteries. Charging Alkaline batteries will lead to product defects and serious injuries. Further more do not try to recharge batteries while the controller is in use. For further information please refer to your Wii console's manual. If you encounter any problems using the snakebyte XS Wireless Pack please read this section carefully before contacting our customer support or your dealer. Turn off your Wii console, disconnect the AC adaptor for ten seconds and restart your Wii console. Make sure your Remote XS Controller is either synced in permanent (STANDARD) or temporary (ONE TIME) mode to the console. My game seems to receive input signals although I do not even touch the controller. The snakebyte Wireless Sensor Bar) is placed directly in the line of sight either on top of or below your TV when playing. Also pay attention to the maximum operating distance of the Remote XS Controller. [. . . ] If you don't want to lose your warranty, please refrain from disassembling the controllers ­ there are no user serviceable parts inside anyway. inappropriate handling does invalidate the warranty and leads to malfunctions of the devices. Keep your Remote and Motion XS Controller away from liquids and liquid containers such as vases, bottles, hot baths, jacuzzi tubs, etc. [. . . ]