User manual SHERWOOD RD-7108

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHERWOOD RD-7108. We hope that this SHERWOOD RD-7108 user guide will be useful to you.


SHERWOOD RD-7108 : Download the complete user guide (792 Ko)

Manual abstract: user guide SHERWOOD RD-7108

Detailed instructions for use are in the User's Guide.

[. . . ] Introduction UNPACKING ENGLISH Congratulations on Your Purchase! Your new high fidelity receiver is designed to deliver maximum enjoyment and years of trouble free service. It will explain the features and operation of your unit and help ensure a trouble free installation. They will be helpful if you ever need to move your unit and may be required if you ever need to return it for service. Your unit is designed to be placed in a horizontal position and it is important to allow at least two inches of space behind your unit for adequate ventilation and cabling convenience. [. . . ] The surround channel is monaural, but is played through both surround speakers. Dolby Pro Logic II surround This mode applies conventional 2- channel signals such as digital PCM or analog stereo signals as well as Dolby Surround signals, etc. to surround processing to offer improvements over conventional Dolby Pro Logic circuits. Dolby Pro Logic II surround includes two modes as follows: Dolby Pro Logic II Cinema When enjoying movies, this mode allows you to further enhance the cinematic quality by adding processing that emphasizes the sounds of the action special effects. Dolby Pro Logic II Music When listening to music, this mode allows you to further enhance the sound quality by adding processing that emphasizes the musical effects. The following modes apply conventional 2-channel signals such as digital PCM or analog stereo signals to high performance Digital Signal Processor to recreate sound fields artificially. Select one of the three provided surround modes according to the program source you want to play. Theater This mode provides the effect of being in a movie theater when watching a movie. Hall This mode provides the ambience of a concert hall for classical music sources such as orchestral, chamber music or an instrumental solo. Matrix This mode reproduces a delayed signals from the surround channels to emphasize the sense of expansion for music sources. Dolby Virtual This mode employs sophisticated digital processing to create the illusion of "phantom" speakers, this mode allows you to experience surround sound effects from Dolby Digital, Dolby Surround or 2-channel (recorded in digital PCM or analog stereo) sources, through just a single pair of front speakers. "Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories. For your reference, the sound from each channel can be reproduced according to the surround modes as follows: Channels Modes DTS DTS ES DISCRETE/MATRIX DTS NEO:6 MOVIE/MUSIC DOLBY DIGITAL DOLBY DIGITAL EX DOLBY PRO LOGIC DOLBY PRO LOGIC II CINEMA/MUSIC DOLBY VIRTUAL MATRIX Other Surround STEREO 7 CH DIRECT · Depending on the speaker settings and the number of the encoded channels, the sound from the corresponding channels cannot be reproduced. (For details, refer to "Adjusting the speaker settings" on page 17. ) (*): Depending on the speaker settings, the sound from the subwoofer channel may be reproduced. FRONT L/R (FRONT) CENTER SURROUND L/R SURROUND BACK (CENTER) SUBWOOFER 15 ENGLISH When using the 7 CH DIRECT INPUTs to playback the sound from an additional multichannel decoder for surround sound, you can enjoy the corresponding surround sound, too. For details, refer to the operating instructions of the component to be connected. Speaker placement Ideal speaker placement varies depending on the size of your room and the wall coverings, etc. The typical example of speaker placement and recommendations are as follows : 2 3 1 4 5 ENGLISH Front left and right speakers and center speaker Place the front speakers with their front surfaces as flush with TV or monitor screen as possible. Place the center speaker between the front left and right speakers and no further from the listening position than the front speakers. Place each speaker so that sound is aimed at the location of the listener's ears when at the main listening position. 6 9 7 Surround left and right speakers Place the surround speakers approximately 1 meter (40 inches) above the ear level of a seated listener on the direct left and right of them or slightly behind. Surround back speaker Place the surround back speaker at the rear center facing the front at a slightly higher position (0 to 10 inches) than the surround speakers. We recommend installing the surround back speaker at a slightly downward facing angle. This effectively prevents the surround back channel signals from reflecting off the TV or screen at the front center, resulting in interference and making the sense of movement from the front to the back less sharp. 1. Listening position Subwoofer The subwoofer reproduces powerful deep bass sounds. Place a powered subwoofer anywhere in the front as desired. Surround speaker Notes : When using a conventional TV , to avoid interference with the TV picture, use only magnetically shielded front left and right and center speakers. To obtain the best surround effects, the speakers except the subwoofer should be full range speakers. Surround back speaker Point slightly downward Front speaker 60 to 90 cm 16 Adjusting the speaker settings · After you have installed this unit and connected all the components, you should adjust the speaker settings for the optimum sound acoustics according to your environment and speaker layout. · There are two kinds of speaker settings for speaker size and speaker distance. Speaker size settings Select the corresponding settings depending on the sizes of the connected speakers and whether the speakers are connected or not. Depending on your speaker type, you can select one of these following settings. Large : Select this when connecting speakers that can fully reproduce sounds below 80 Hz. Small : Select this when connecting speakers that cannot fully reproduce sounds below 80 Hz. [. . . ] 110 W Surround power output, 6 , 1 kHz, THD 0. 7 % . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 W+110 W Surround back power output, 6 , 1 kHz, THD 0. 7 % . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 W ENGLISH DIGITAL AUDIO SECTION Sampling frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32, 44. 1, 48, 96 kHz Digital input level Coaxial, 75 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHERWOOD RD-7108




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHERWOOD RD-7108 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.