User manual SEAGATE CHEETAH NS 10K.2 FC

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SEAGATE CHEETAH NS 10K.2 FC. We hope that this SEAGATE CHEETAH NS 10K.2 FC user guide will be useful to you.


SEAGATE CHEETAH NS 10K.2 FC : Download the complete user guide (1626 Ko)

Manual abstract: user guide SEAGATE CHEETAH NS 10K.2 FC

Detailed instructions for use are in the User's Guide.

[. . . ] Product Manual Cheetah NS 10K. 2 FC ST3600002FC ST3450802FC ST3300602FC 100516227 Rev. B, July 2009 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Cheetah, SeaTools and SeaTDD are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/ or other countries. All other trademarks or registered trademarks are the property of their respective owners. [. . . ] Operating The maximum allowable continuous or sustained HDA case temperature for the rated Annualized Failure Rate (AFR) is 122°F (50°C) The maximum allowable HDA case temperature is 60°C. Occasional excursions of HDA case temperatures above 122°F (50°C) or below 41°F (5°C) may occur without impact to the specified AFR. Continual or sustained operation at HDA case temperatures outside these limits may degrade AFR. Provided the HDA case temperatures limits are met, the drive meets all specifications over a 41°F to 131°F (5°C to 55°C) drive ambient temperature range with a maximum temperature gradient of 86°F (30°C) per hour. Air flow may be needed in the drive enclosure to keep within this range (see Section 8. 3). Operation at HDA case temperatures outside this range may adversely affect the drives ability to meet specifications. To confirm that the required cooling for the electronics and HDA case is provided, place the drive in its final mechanical configuration, perform random write/read operations and measure the HDA case temperature after it has stabilized. Non-operating ­40° to 158°F (­40° to 70°C) package ambient with a maximum gradient of 86°F (30°C) per hour. This specification assumes that the drive is packaged in the shipping container designed by Seagate for use with drive. HDA Temp. Check Point 1. 0 " . 5" Figure 7. Locations of the HDA temperature check point 6. 4. 2 Relative humidity The values below assume that no condensation on the drive occurs. Operating 5% to 95% non-condensing relative humidity with a maximum gradient of 20% per hour. Non-operating 5% to 95% non-condensing relative humidity. 32 Cheetah NS 10K. 2 FC Product Manual, Rev. Non-operating ­1, 000 to +40, 000 feet (­305 to +12, 192 meters) 6. 4. 4 Shock and vibration Shock and vibration limits specified in this document are measured directly on the drive chassis. If the drive is installed in an enclosure to which the stated shock and/or vibration criteria is applied, resonances may occur internally to the enclosure resulting in drive movement in excess of the stated limits. If this situation is apparent, it may be necessary to modify the enclosure to minimize drive movement. The limits of shock and vibration defined within this document are specified with the drive mounted by any of the four methods shown in Figure 8, and in accordance with the restrictions of Section 8. 4. Operating--normal The drive, as installed for normal operation, shall operate error free while subjected to intermittent shock not exceeding: · 15 Gs at a duration of 11 msec (half sinewave) · 20 Gs at a duration of 2 msec (half sinewave) · 60 Gs at a duration of 2 msec (half sinewave) when performing reads only Shock may be applied in the X, Y, or Z axis. Operating--abnormal Equipment, as installed for normal operation, does not incur physical damage while subjected to intermittent shock not exceeding 40 Gs at a duration of 11 msec (half sinewave). Shock occurring at abnormal levels may promote degraded operational performance during the abnormal shock period. Specified operational performance will continue when normal operating shock levels resume. Non-operating The limits of non-operating shock shall apply to all conditions of handling and transportation. The drive subjected to nonrepetitive shock not exceeding the three values below, shall not exhibit device damage or performance degradation. [. . . ] Presales Support: Presales@Seagate. com Technical Support: DiscSupport@Seagate. com Warranty Support: http://www. seagate. com/www/en-us/support/warranty_&_returns_assistance mySeagate my. seagate. com is the industry's first Web portal designed specifically for OEMs and distributors. It provides self-service access to critical applications, personalized content and the tools that allow our partners to manage their Seagate account functions. Submit pricing requests, orders and returns through a single, passwordprotected Web interface-anytime, anywhere in the world. spp. seagate. com spp. seagate. com supports Seagate resellers with product information, program benefits and sales tools. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SEAGATE CHEETAH NS 10K.2 FC




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SEAGATE CHEETAH NS 10K.2 FC will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.