User manual SEAGATE BARRACUDA 7200.10 SERIAL ATA
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SEAGATE BARRACUDA 7200.10 SERIAL ATA. We hope that this SEAGATE BARRACUDA 7200.10 SERIAL ATA user guide will be useful to you.
Manual abstract: user guide SEAGATE BARRACUDA 7200.10 SERIAL ATA
Detailed instructions for use are in the User's Guide.
[. . . ] Product Manual
Barracuda 7200. 10 Serial ATA
ST3750640AS ST3750840AS ST3500630AS ST3500830AS ST3400620AS ST3400820AS ST3320620AS ST3320820AS ST3300620AS ST3300820AS ST3250620AS ST3250820AS
ST3250410AS ST3250310AS ST3200820AS ST3160815AS ST3160215AS ST3120815AS ST3120215AS ST380815AS ST380215AS ST340815AS ST340215AS
100402371 Rev. J November 2007
evision history
Revision Date Sheets affected or comments
Rev. J
05/01/06 07/20/06 08/14/06 09/26/06 10/04/06 05/04/07 08/23/07 09/06/07 11/05/07
Initial release. Added 160 - 40GB models 19, 21, 23, 25 and 35 Front cover, 1, 3, 14-15, 26-29, 33, 35, 38, 41-42, 49 and 53-56. [. . . ] specification, which may increase acoustic and power to operational levels.
30
Barracuda 7200. 10 Serial ATA Product Manual, Rev. Typical 12V startup and operation current profile
2. 8. 2
Conducted noise
Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load on the +12 volt line or an equivalent 15-ohm resistive load on the +5 volt line. · Using 12-volt power, the drive is expected to operate with a maximum of 120 mV peak-to-peak square-wave injected noise at up to 10 MHz. · Using 5-volt power, the drive is expected to operate with a maximum of 100 mV peak-to-peak square-wave injected noise at up to 10 MHz. Equivalent resistance is calculated by dividing the nominal voltage by the typical RMS read/write current. 2. 8. 3 Voltage tolerance
Voltage tolerance (including noise): 5V ± 5% 12V ± 10%
Barracuda 7200. 10 Serial ATA Product Manual, Rev. J
31
2. 8. 4
Power-management modes
The drive provides programmable power management to provide greater energy efficiency. In most systems, you can control power management through the system setup program. The drive features the following power-management modes:
Power modes Active Idle Standby Sleep Heads Tracking Tracking Parked Parked Spindle Rotating Rotating Stopped Stopped Buffer Enabled Enabled Enabled Disabled
· Active mode The drive is in Active mode during the read/write and seek operations. · Idle mode The buffer remains enabled, and the drive accepts all commands and returns to Active mode any time disc access is necessary. · Standby mode The drive enters Standby mode when the host sends a Standby Immediate command. If the host has set the standby timer, the drive can also enter Standby mode automatically after the drive has been inactive for a specifiable length of time. The standby timer delay is established using a Standby or Idle command. In Standby mode, the drive buffer is enabled, the heads are parked and the spindle is at rest. The drive accepts all commands and returns to Active mode any time disc access is necessary. · Sleep mode The drive enters Sleep mode after receiving a Sleep command from the host. In Sleep mode, the drive buffer is disabled, the heads are parked and the spindle is at rest. The drive leaves Sleep mode after it receives a Hard Reset or Soft Reset from the host. After receiving a reset, the drive exits Sleep mode and enters Standby mode with all current translation parameters intact. · Idle and Standby timers Each time the drive performs an Active function (read, write or seek), the standby timer is reinitialized and begins counting down from its specified delay times to zero. If the standby timer reaches zero before any drive activity is required, the drive makes a transition to Standby mode. In both Idle and Standby mode, the drive accepts all commands and returns to Active mode when disc access is necessary.
32
Barracuda 7200. 10 Serial ATA Product Manual, Rev. [. . . ] J
5. 0
Seagate Technology support services
Online services
Internet
For information regarding Seagate products and services, visit www. seagate. com. Worldwide support is available 24 hours daily by email for your questions. Presales Support: Presales@Seagate. com Technical Support: DiscSupport@Seagate. com Warranty Support: http://www. seagate. com/support/service/index. html mySeagate my. seagate. com is the industry's first Web portal designed specifically for OEMs and distributors. It provides self-service access to critical applications, personalized content and the tools that allow our partners to manage their Seagate account functions. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SEAGATE BARRACUDA 7200.10 SERIAL ATA
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SEAGATE BARRACUDA 7200.10 SERIAL ATA will begin.