User manual SANUS STEEL FOUNDATIONS-SF22 SF26 SF30 SF34

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SANUS STEEL FOUNDATIONS-SF22 SF26 SF30 SF34. We hope that this SANUS STEEL FOUNDATIONS-SF22 SF26 SF30 SF34 user guide will be useful to you.


SANUS STEEL FOUNDATIONS-SF22 SF26 SF30 SF34 : Download the complete user guide (1937 Ko)

Manual abstract: user guide SANUS STEEL FOUNDATIONS-SF22 SF26 SF30 SF34

Detailed instructions for use are in the User's Guide.

[. . . ] (PHOTO 1) A) isolation block - 2 B) 1-1/2" pan head bolt - 4 C) lock washer - 4 D) rubber isolation pad - 16 E) plastic foot - 8 F) 5/8" pan head bolt - 8 G) carpet spike - 8 H) machine nut - 16 I) allen key - 2 J) speaker stud - 8 K) 5/8" speaker bolts (2) (For Boston Acoustics VRM series and other bolt­mount speakers. Before installing, be sure to check that the feet are mounted with the (1) foot on the front left and rear right of the base, (2) front right and rear left. [. . . ] ) Align the holes in the top plate with corresponding holes in the top of each pillar. Bolt the pillars and the top plate together using the flat head bolts (n). 3] Both spiked feet (g) and rubber feet (d) are provided for your Steel Foundations®. Thread a machine nut (h) over the spiked feet and thread the ends of the spiked feet into the threaded inserts in the corner feet. Adjust the spiked feet until the stand is level and then lock into place by tightening the machine nut. 4] Three forms of speaker mounts are provided, steel speaker studs (j), rubber pads (d) and the new Foundation MountTM (k) which is discussed in the next section. To utilize the steel speaker studs, thread them into the holes in the corners of the top plates until the end Photo 5-Next, insert the small allen key (i) into the bottom of each steel speaker stud and adjust them until the speaker is level. * The rubber isolation pads are provided as an alternative and may be threaded into the corners of the top plates. 5] Many manfucturers are providing threaded inserts on the bottom of their speakers for the Foundation MountTM system. This system allows you to bolt your speaker to the top plate using 5/8" speaker bolts provided. [. . . ] For this reason large rubber feet and rubber isolation pads are provided as an option. If you have any questions or feel that there is a problem of any kind, please call our Customer Assistance number. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SANUS STEEL FOUNDATIONS-SF22 SF26 SF30 SF34




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SANUS STEEL FOUNDATIONS-SF22 SF26 SF30 SF34 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.