User manual SANUS COMPONENT FURNITURE BRIDGE-CFBTB

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SANUS COMPONENT FURNITURE BRIDGE-CFBTB. We hope that this SANUS COMPONENT FURNITURE BRIDGE-CFBTB user guide will be useful to you.


SANUS COMPONENT FURNITURE BRIDGE-CFBTB : Download the complete user guide (738 Ko)

Manual abstract: user guide SANUS COMPONENT FURNITURE BRIDGE-CFBTB

Detailed instructions for use are in the User's Guide.

[. . . ] Assembly Instruction for Sanus Systems Component Furnture Model: CFBT Thank you for choosing Sanus Systems Component Furniture. Please check carefully to make sure there are no missing or defective parts. [. . . ] Place a Bracket (b) onto each of the CFA56 audio stands as shown in Detailed View A of Diagram 1a. Orient the Brackets so that the two small slots line up with the top shelf pin hole in the CFA56 and the long slot hangs out over the outside edge of the cabinet. Lightly tighten two Screws (a) through the slots in the Bracket and into the top holes in the Side Panel Assembly of the CFA56. Repeat this step on the opposite side of the second CFA56 so that the long slot in each Bracket is between the two cabinets as shown in Diagram 1. Finally, slide each of the Brackets up until it is flush with the top of the audio stand and tighten the two Screws firmly as shown in Detailed View B of Diagram 1b. Detailed View A Detailed View B b b Diagram 1a a a Diagram 1b Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 2. 23. 05 Customer Service: 800. 359. 5520. See complementary Sanus products at www. sanus. com Step 2: Add the Cross Brace Once the two Brackets (b) are in place, position the two CFA56 stands to aproximately 47" apart. The open channel faces down, and the tab on each end sits under the Brackets added in the previous step. Feed one Cross Brace tab in under a bracket so it rests on the side panel of the CFA56 and then slide the other end under the second Bracket. The hole in each end of the Cross Brace should line up with the slot in each of the Brackets as shown in the Top View of Diagram 2. Diagram 2 Top View b c Step 3: Add the Top Place the Bridge (d) down onto the Brackets (b) as shown in Diagram 3. [. . . ] Note: The CFBT can slide backward or forward within the length of the slot in each Bracket (b). Once you have selected the desired position of the CFBT firmly tighten the two Screws (a). Bottom View Diagram 3 Complete Assembly b CFA56 CFA56 Side Panel slot a c [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SANUS COMPONENT FURNITURE BRIDGE-CFBTB




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SANUS COMPONENT FURNITURE BRIDGE-CFBTB will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.