User manual SAMSUNG UN46F6400AF

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SAMSUNG UN46F6400AF. We hope that this SAMSUNG UN46F6400AF user guide will be useful to you.


SAMSUNG UN46F6400AF : Download the complete user guide (5322 Ko)

You may also download the following manuals related to this product:

   SAMSUNG UN46F6400AF (5097 ko)
   SAMSUNG UN46F6400AF QUICK GUIDE (9498 ko)
   SAMSUNG UN46F6400AF SKYPE GUIDE (1586 ko)
   SAMSUNG UN46F6400AF INSTALLATION GUIDE (1876 ko)
   SAMSUNG UN46F6400AF SKYPE GUIDE (2016 ko)
   SAMSUNG UN46F6400AF QUICK GUIDE (9498 ko)
   SAMSUNG UN46F6400AF INSTALLATION GUIDE (1876 ko)

Manual abstract: user guide SAMSUNG UN46F6400AF

Detailed instructions for use are in the User's Guide.

[. . . ] Install two AAA batteries. When you turn on your TV for the first time, it automatically launches the Plug & Play function. With Plug & Play, you can select the On Screen Display language, set the clock mode, and launch the TV's channel memorizing process. It also displays connection instructions similar to those in this guide. To navigate while Plug & Play is running, press the Up, Down, Left or Right arrow buttons on your remote. [. . . ] Thereafter, each time you press the P. SIZE button, you change the size of the picture on the screen. For a studio quality cinema picture in a dimly lit or dark room. Make sure to match the + and - ends of the batteries to the diagram in the battery compartment. 2 Select Home Use, and then select the language for the On Screen Display (OSD), and then press the ENTERE button. Plug & Play Select Language of the OSD. Menu Language : English Español Français U Move E Enter To change the Picture Mode, follow these steps: 1. On the Picture Mode menu, use the or on your remote to select the Picture Mode you want. If you select Store Demo, the TV will reset your picture and audio settings every 30 minutes. Cable or Auto, you must select Channel Source to same type as your cable system type. After selecting source, select Search; then press the ENTERE button on your remote. 3. If Antenna Source is VHF/UHF Antenna Step 3: Connect Power and Antenna or Cable Antenna Cable (Not Supplied) Setting the Clock 16:9 Wide screen 4:3 Standard screen Wide Fit Most cable systems are Standard(STD) systems, If you are not sure about what kind of cable system you have, contact your cable company. If your TV is attached to a cable or satellite box, skip Steps 3 through 5. After Plug & Play is complete, set your TV to Channel 3 or 4, according to the directions for your cable or satellite box. Before you can use your TV's On/Off Timer, you must set the clock. Turn on your TV, press the MENU button on your remote, then select Setup Time. CC: Controls the caption decoder. LAN Cable (Not Supplied) The LAN Port on the Wall TV Rear Panel Samsung's Wireless LAN adapter supports the IEEE 802. 11A, IEEE 802. 11B, IEEE 802. 11G, and IEEE 802. 11N wireless communication protocols. For your TV to connect to your network, the wireless router or modem you use must also support one of these protocols. Most wireless network systems incorporate a security system that requires devices that access the network through an access point or AP (typically a wireless modem or router) to transmit an encrypted security code called an access key. FWhen connecting Samsung Wireless LAN Adapter to TV in 802. 11N mode, WEP/ TKIP/TKIP-AES is not supported. Returns to the previous menu. Buttons used in the Channel list, Media Play (USB) menu, etc. RETURN A B C EXIT D Configuring the Network Connection - Wireless The instructions below are for networks that use the Dynamic Host Configuration Protocol (DHCP) to configure network connections automatically. If your have a Static IP network, see your user's manual for configuration instructions. To configure your network connection for a network that uses DHCP, follow these steps: 1. Turn on your TV, press the MENU button on your remote, and the select Setup Network. Set the Network Type to Wireless if it is not already set to Wireless. On the Network Setup menu, select an AP(Access Point) and ad hoc network. if you have selected network with a security key, the Security Key screen appears. [. . . ] Connect your TV to your network as shown in one of the illustrations above. Turn on your TV, press the MENU button on your remote, and then select Setup Network. On the Network Setup menu, set Internet Protocol Setup and DNS to Auto. Select Network Test to check Internet connectivity. S. MODE P. MODE SLEEP P. SIZE MTS CC Use these buttons in Media Play (USB) and Anynet+ (HDMI-CEC) modes. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SAMSUNG UN46F6400AF




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SAMSUNG UN46F6400AF will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.