User manual SAMSUNG S1065

[. . . ] Set up the camera driver Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in Application software CD-ROM. (p. 16) Getting to Know your camera Thank you for buying a Samsung Digital Camera. If you require After Sales service, please bring the camera and the cause of the camera malfunction (such as battery, Memory card etc. ) to the A/S centre. [. . . ] - Sub menus [Off] : The AF lamp will not light up in low light conditions. [On] : The AF lamp will light up in low light conditions. SETTINGS Reset File Imprint Power Off Video Out AF Lamp Back Off On OK Set 03 SETUP Selecting a battery type If a battery type is selected, the camera will be optimized according to the selected battery type. [Battery Type] sub Menu : Alkaline / Ni-MH SETTINGS File Imprint Power Off Video Out AF Lamp Battery Type Back Alkaline Ni-MH OK Set SETUP_ 49 Starting play mode Turn the camera on and select Play mode by pressing the play mode button ( ). If the memory card is inserted in the camera, all the camera functions apply only to the memory card. If the memory card is not inserted in the camera, all the camera functions apply only to the internal memory. Playing back a movie clip 1. Select the recorded movie clip that you want to play back by using the Left/Right button. Press the play & pause button ( ) to play back a movie clip file. - To pause a movie clip file while playing it back, press the play & pause button again. - Pressing the play & pause button () again will cause the movie clip file to restart. - To rewind the movie clip while it is playing, press the Left button. - To stop playback of the movie clip, press the play & pause button, and then press the Left or Right button. Play E Capture Playing back a still image 1. The last image stored on the memory is displayed on the LCD monitor. 3. Select an image that you want to view by pressing the Left/ Right button. Press and hold the Left or Right button to play back the images quickly. 50 _PLAY Starting play mode Movie clip capture function You can capture still images from the movie clip. The captured movie clip file is the same size as the original movie clip (640x480, 320x240). When you press the E button at the beginning of the movie clip, the first frame of the movie clip will be saved as a still image. Playing back a recorded voice 1. Select the recorded voice that you want to play back by using the Left/Right button. Press the play & pause button ( ) to play back a recorded voice file. - To pause a recorded voice file, while playing it back, press the play & pause button Play again. - To resume playback of the voice file, press the play & pause button - To rewind the voice file while it is playing, press the Left button. - To stop playback of the voice memo, press the play & pause button and then press the MENU/OK button. 04 PLAY Play E Capture [Paused] Playing back a voice memo [Press the E button] 1. - To pause the voice memo, while playing it back, press the play & pause button ( ) again. [. . . ] In this case, disconnect the PC and the camera and Windows will start. If the problem happens continuously, set the Legacy USB Support to disable and re-start the PC. (The BIOS setup menu differs from the PC manufacturers and some BIOS menus don't have Legacy USB Support) If you can't change the menu by yourself, contact to the PC manufacturer or BIOS manufacturer. If the movie clip can't be deleted, or the removable disk can't be extracted or an error message displays during the file transfer. [. . . ]