User manual SAMSUNG DV393GPTAWR/A1

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SAMSUNG DV393GPTAWR/A1. We hope that this SAMSUNG DV393GPTAWR/A1 user guide will be useful to you.


SAMSUNG DV393GPTAWR/A1 : Download the complete user guide (12281 Ko)

Manual abstract: user guide SAMSUNG DV393GPTAWR/A1

Detailed instructions for use are in the User's Guide.

[. . . ] Imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service or accessory parts, please register your product at or contact www. Extra Large Capacity Ultra drying capabilities are at your fingertips!Capacity dryer circulates more air through your clothes, drying them faster for a wrinkle-free result. [. . . ] To ensure that the dryer provides optimal drying performance, it must be level. Using a level, check if the dryer is level side to side and then front to back. If the dryer is not level, adjust the leveling feet on the bottom of the dryer until the washer is level side to side and back to front. To set the dryer to the same height as the washer, fully retract the leveling feet by turning them counterclockwise, then loosen the feet by turning them clockwise. Once the dryer is the same height as the washer, follow the directions above to level the dryer. Leveling feet Retract fully Then loosen Adjust the leveling feet only as much as necessary to level the dryer. Extending the leveling feet more than necessary can cause the dryer to vibrate. Make sure all gas connections (on gas models), exhaust, and electrical connections are complete. Plug in your dryer, and then check its operation by using the checklist below. For GAS MODELS ONLY The burner may not ignite initially due to air in the gas line. If the gas does not ignite within 5 minutes, turn your dryer off and wait 5 minutes. fINAL INSTALLATION CHECKLIST       The dryer is plugged into an electrical outlet and grounded properly. You have used rigid or stiff-walled flexible metal duct material, not plastic flexible duct. Indd Sec5:22 2012-11-23 4:50:43 CONNECTING THE INLET HOSE Method1 - Using the Y Connector and Long Hose The dryer must be connected to the cold water faucet using the new inlet hoses. If you have a washer water hose attached to the cold water faucet, Y-Connector unscrew and remove the hose. If space permits, attach the brass female end of the “Y”connector to the cold water faucet. Attach the straight end of the long hose to the “Y’ connector. Using pliers, tighten the hose coupling with an additional two thirds Duct Exhaust turn. Attach the angled end of the long hose to the fill valve at the bottom of the dryer’s rear frame. Using pliers, tighten the hose coupling with an additional two thirds turn. Attach the water hose to the other side of the “Y” connector. Using pliers, tighten the coupling with an additional two thirds turn. [. . . ] SAMSUNG does not warrant uninterrupted or error-free operation of the product. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific rights, and you may also have other rights, which vary from state to state. Com/ca_fr (French) Visits by a Service Engineer to explain functions, maintenance or installation is not covered by warranty. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SAMSUNG DV393GPTAWR/A1




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SAMSUNG DV393GPTAWR/A1 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.