User manual SAMSUNG AV-R610

[. . . ] Digital Surround AV Receiver System HT-AS610 THIS APPLIANCE IS MANUFACTURED BY: Instruction Manual (AV-R610) AH68-01853B Safety Warnings CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1 Precautions GB Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION-INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM. This symbol indicates that dangerous voltage which can cause electric shock is present inside this unit. This symbol alerts you to important operating and maintenance instructions accompanying the unit. VOLUME PREPARATION CAUTION RISK OF ELECTRIC SHOCK. [. . . ] For F. L, CEN, F. R, the distance from the speaker to listening position between 0. 3~ 9m in intervals of 0. 3m. To Exit Setup Mode Wait for about 5 seconds or press SETUP button. "SETUP MODE OFF" appears on the display and exit Setup Mode. If the listening position is beyond the range of speaker distance setup when you place the speaker, set the speaker distance to the maximum. 22 23 Setting Digital Input You can set the digital input for a DVD/CD player to either OPTICAL or COAXIAL. Setting DRC (Dynamic Range Compression) You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night. GB MAIN UNIT button. "SETUP MODE" 2 Press FUNCTION button 3 times. "DIGITAL IN" appears on the display. REMOTE CONTROL Press DRC button. Each time you press this button, DRC : STD DRC : MAX DRC : MIN will be selected in turn. MAIN UNIT button. "SETUP MODE" 2 Press FUNCTION button 4 times. "DRC SETUP" appears on the display. OPERATION SURROUND 3 Presstime this button, DVDbutton to select theinDVD or CD function. 4 Press SELECT( , ) button to set the digital input. Each time you press this button, OPTICAL COAXIAL will be selected in turn. To Exit Setup Mode Wait for about 5 seconds or press SETUP button. "SETUP MODE OFF" appears on the display and the unit exits Setup Mode. button. "DRC STD" appears on 4 Press SELECT( , ) button to set DRC. Each time you press this button, DRC : STD DRC : MAX DRC : MIN will be selected in turn. To Exit Setup Mode Wait for about 5 seconds or press SETUP button. "SETUP MODE OFF" appears on the display and the unit exits Setup Mode. Setting DRC STD : Sets DRC effect to standard. MIN : Sets DRC effect to minimum. 24 25 Test Tone Use test tone to check the speaker connection status or level. GB To Automatically Output Test Tone REMOTE CONTROL Press TEST TONE button. Test signal will be automatically output as follows; F. L CEN F. R S. R S. L S. W. During test tone output, press . . . button to adjust the speaker output level To Manually Output Test Tone MAIN UNIT OPERATION from -10 to +10 dB by 1 step. To Stop Test Tone Press TEST TONE button again. MAIN UNIT button. 3 Press SURROUND button. Test signal will be automatically output as follows; F. L CEN F. R button. 1 Press SETUPappears on the display and the unit enters into Setup Mode. "SETUP MODE" 2 Press FUNCTION button 6 times. "TEST-T MANU" appears in the display. 3 Press SURROUND button. be selected in turn. Each time you press this button, F. L CEN F. R S. R S. L S. W will 4 Press SELECT( want. , ) button to set the test tone as you S. R S. L S. W . During test signal output, press SELECT ( , You can adjust the speaker output level from -10 to +10dB by 1 step. The sound gets quieter at -10dB and louder at +10dB. ) button to adjust the speaker output level from -10 to +10 dB by 1 step. To Stop Test Tone Press SETUP button 1 time. "SETUP MODE OFF" appears on the display and test signal stops. To Stop Test Tone Press SETUP button 1 time. "SETUP MODE OFF" appears on the display and test tone stops. Test Tone Output F. L (Front-Left) : -10 ~ +10dB CEN (Center) : -10 ~ +10dB F. R (Front-Right) : -10 ~ +10dB S. R (Surround-Right) : -10 ~ +10dB S. L (Surround-Left): -10 ~ +10dB S. W (Subwoofer): -10 ~ +10dB 26 27 Setting Speaker Level You can set the balance and level of speakers GB Remote Control SPK the 1 Presstime youLEVEL button to select F. R speaker you want. Each press this button, F. L CEN S. R S. L S. W SPK LVL OFF will be selected in turn. MAIN UNIT to set the speaker 2 Press . . . You can adjust it from The sound gets quieter at -10dB and louder at +10dB. Default setting value is 00dB. 1 Press SETUP button. "SETUP MODE" appears on the display and enters into Setup Mode. 8 times. "LEVEL SETUP" appears on the OPERATION To Exit Setup Mode Wait for about 5 seconds or press SPK LEVEL button on the remote control to select SURROUND button. 3 Presstime you press this button, F. L CEN F. R S. R S. L S. W Each SPK LVL OFF. will be selected in turn. 4 Press SELECT( you want. , ) button to set to the speaker level You can adjust it from -10 to +10dB by 1 step. Default setting value is 00dB To Exit Setup Mode Wait for about 5 seconds or press SETUP button. "SETUP MODE OFF" appears on the display and exits Setup Menu. Setting Speaker Level F. L (Front-Left) : -10 ~ +10dB CEN (Center) : -10 ~ +10dB F. R (Front-Right) : -10 ~ +10dB S. R (Surround-Right) : -10 ~ +10dB S. L (Surround-Left): -10 ~ +10dB S. W (Subwoofer): -10 ~ +10dB 28 29 Dolby Pro Logic ll Mode This mode provides 5. 1 channel sound from 2 channel sources GB REMOTE CONTROL Press MODE button. Each time you press this button, CINEMA MATRIX GAME PROLOGIC MUSIC will be selected in turn. MAIN UNIT 1 Press SURROUND button to select "DPL ll" Mode. Each time you press this button, DPL ll SFE STEREO will be selected in turn. 2 Press SELECT( OPERATION , ) button. ) button, CINEMA MATRIX GAME PROLOGIC MUSIC will be selected in turn. Each time you press SELECT ( ) button, MUSIC PROLOGIC GAME MATRIX CINEMA will be selected in turn. Each time you press SELECT ( To Exit Setup Mode Wait for about 5 seconds. To Exit Setup Mode Wait for about 5 seconds. Dolby Pro Logic ll Mode MUSIC : Provides 5. 1 Channel Surround sound to digital, analog or existing stereo sources such as CD, TAPE, FM, TV and Stereo VCR. PROLOGIC : You will experience a surround effect with just the front left and right speakers. You cannot use Dolby Pro Logic ll Mode for multi channel signals such as Dolby Digital and DTS. Pro Logic works only for PCM audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz. Sound will not be output from rear center speaker if PCM audio signal is mono. 30 31 Dolby Pro Logic ll Effect This function works only in Dolby PRO LOGIC II MUSIC Mode. GB REMOTE CONTROL MODE button to select `MUSIC' Mode. DIMENSION PANORAMA Each C-WIDTH DPL ll EFT OFF will be selected in turn. MAIN UNIT button. "DPL MODE"appears on the display. OPERATION 3 Press . . . button to select Dolby Pro Logic II effect you want. C-WIDTH: You can set from 0 to 7. [. . . ] The center unit searches 10 preset FM stations, stops when it finds the one you have selected, and tunes in that station. FINANCE CHILDREN SOCIAL A RELIGION PHONE IN TRAVEL LEISURE JAZZ COUNTRY NATION M OLDIES If searching finishes at once, "PS", and "RT" will not appear on the display. FOLK M DOCUMENT 40 41 Convenient Functions Sleep Timer Function You can set the time that this unit will shut itself off. GB Reset Function REMOTE CONTROL REMOTE CONTROL Press the SLEEP button. SLEEP : OFF 15 30 45 60 90 120MIN will be selected in turn. To Check Sleep Timer Press SLEEP button. The remaining time before this unit will shut itself off is shown on the display. Pressing the button again changes the sleep time from what you have set earlier. 1 Press the MUTE button. Press "0" button five 2 press ENTER button. times and then 3 Press . . . buttons to select "YES". MUTE appears on the display. The unit will turn automatically back on in 5 seconds. Caution Using the RESET function will erase all stored settings. [. . . ]