User manual SAMSUNG SYNCMASTER 794MG

[. . . ] Install driver Install programs SyncMaster 591S/591SG/591V/594MG/592V/ 794V/793DF/793MG/793SG/793V/ 794MG/793S/783DF/788DF Plus Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Ground to prevent an electric shock Power When not used for extended periods of time, set your computer to a screen saver. If the same image is present for long periods of time, Phosphor Burnt can be occured, or the screen may be blurred. The images here are for reference only, and are not applicable in all cases (or countries). This may cause electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. [. . . ] All other settings will remain the same. Play/Stop Menu Description Color temperature is a measure of the 'warmth' of the image colors. (6500K / 9300K) Use to adjust the monitor color setting. (Red) Use to adjust the monitor color setting. (Green) Use to adjust the monitor color setting. (Blue) Standard Red Green Blue (sRGB) is a defined default color space. If a monitor, printer and scanner are all calibrated to the sRGB color characteristics, then you can find color matching from each peripheral. Note:When the monitor is in the sRGB mode, Brightness / Contrast adjustment is not available. Play/Stop Menu Description Follow these instructions to change the horizontal position of the monitor's entire display. Follow these instructions to change the vetical position of the Play/Stop monitor's entire display. Follow these instructions to change the horizontal size of the monitor's entire display. Follow these instructions to change the vertical size of the monitor's entire display. Adjust the pincushion setting when the sides of the display are bowed in or bowed out. Adjust the pinbalance setting when the sides of the display are bowed towards the left or right. Adjust the trapezoid setting when the top or bottom of the display is too large or small. Adjust the parallelogram setting when the display is leaning left or right. Adjust the rotation setting when the entire display is tilted left or right. Provides information about the display timing and sync signals polarity(user mode). These screens do not allow any changes to the settings, they are for information only. Installation 1. When the Installation Shield Wizard window appears, click "Next. " Select "I agree to the terms of the license agreement" to accept the terms of use. Click "Install. " The "Installation Status" window appears. Click "Finish. " When the installation is complete, the MagicTuneTM executable icon appears on your desktop. Double-click the icon to start the program. MagicTuneTM execution icon may not appear depending on specification of computer system or monitor. If that happens, press F5 Key. Installation Problems The installation of MagicTuneTM can be affected by such factors as the video card, motherboard and the network environment. System Requirements OS Windows Windows Windows Windows 2000 XP Home Edition XP Professional VistaTM It is recommended using MagicTuneTM in Windows® 2000 or later. Hardware 32 MB Memory above 60 MB Hard disk space above * For more information, visit the MagicTuneTM website. Uninstall The MagicTuneTM program can be removed only by using the "Add or Remove Programs" option of the Windows® Control Panel. Go to [Task Tray] ' [Start] ' [Settings] and select [Control Panel] in the menu. If the program runs on Windows® XP, go to [Control Panel] in the [Start] menu. In the "Add or Remove Programs" screen, scroll down to find "MagicTuneTM . " Click on it to highlight it. Wait until the "Uninstall Complete" dialog box appears. Visit the MagicTuneTM website for technical support for MagicTuneTM , FAQs (questions and answers) and software upgrades. Check List Before calling for service, check the information in this section to see if you can remedy any problems yourself. [. . . ] The distance between two dots of the same color is called the 'Dot Pitch'. Unit: mm Vertical Frequency The screen must be redrawn several times per second in order to create and display an image for the user. The frequency of this repetition per second is called the Vertical Frequency or Refresh Rate. Unit: Hz Example: If the same light repeats itself 60 times per second, this is regarded as 60 Hz. [. . . ]