User manual ROLLS MA2152

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ROLLS MA2152. We hope that this ROLLS MA2152 user guide will be useful to you.


ROLLS MA2152 : Download the complete user guide (2023 Ko)

You may also download the following manuals related to this product:

   ROLLS MA2152 MANUAL 2 (660 ko)
   ROLLS MA2152 DATASHEET (205 ko)

Manual abstract: user guide ROLLS MA2152

Detailed instructions for use are in the User's Guide.

[. . . ] In the absence of such purchase receipt, the warranty period shall be one (1) year from the date of manufacture. This warranty shall be invalid if the product is damaged as a result of defacement, misuse, abuse, neglect, accident, destruction or alteration of the serial number, improper electrical voltages or currents, repair, alteration or maintenance by any person or party other than our own service facility or an authorized Service Center, or any use violative of instructions furnished by us. This one-year warranty is in lieu of all expressed warranties, obligations or liabilities. ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE ONE YEAR DURATION OF THIS WRITTEN LIMITED WARRANTY. [. . . ] -14 dBV Mic level Max Source: 24 dBV Insert: 24 dBV 2: XLR, 8: Stereo RCA, 3: 1/4" TRS, 4: 5-way binding posts +12 VDC Mic: 60 dBV Source: 26 dBV +/-12 dB 100 Hz Bass +/-12 dB 11kHz Treble Speaker out: -67 dBV Pre Out: -90 dBV 96 dBV 60 dBV 100 Watts RMS/Ch. 8 Ohms 200 Watts RMS - 8 Ohms/70V 4, 8, 16 Ohms, 25V Stereo, 70V Mono <. 08%, (1 kHz @ 1 Watt) RCA Record Out, 5-Way binding post Power Amp Outputs 60 Hz - 30 kHz, +/- 1 dB > 150 100 Volts/microSecond <10 Deg. , 20 Hz - 20 kHz 120 VAC, 60 Hz 2. 5A 19" x 3. 5" x 7. 5" (48 x 9 x 19 cm) 12 lbs (5. 5 kg) DESCRIPTION FRONT PANEL Mic 1, 2: Adjust the level of signal from the corresponding Mic Input. TONE 1, 2: Adjusts the frequency content of the microphone signal in the channel. When the control is turned counter-clockwise, the high frequencies are cut, when the control is turned clockwise, the low frequencies are cut. Treble: Adjusts the high frequencies of the Source 1 and 2 signals only. Power: LED indicating power is applied to the MA2152 and the unit is on. REAR PANEL Power Bandwidth: Damping Factor: Slew Rate: Phase Shift: Power: Size: Weight: SCHEMATIC POWER AMP SECTION FUSE: 4 Amp fuse. 4 - 8 Ohm / 25 Volt Output: The two red banana jacks are used when the MA2152 is in Bridge/Mono, or 70V mode. RECORD OUT: Stereo RCA jacks, contains all mixed signals before the Master Level controls. SOURCE INPUTS: Stereo RCA jacks, Channels 1 - 3, for connection to stereo sources such as AM/FM tuners, cassette players, cd players, or video players. DIP SWITCH: Contains the small switches for engaging Mic 1, 2 phantom power, Source 3 Stereo or Mono, the priority (Talk Over) functions, and the Mono/Stereo select. MICROPHONE ONE and TWO: Balanced XLR inputs to be connected to dynamic or condenser microphones. BRIDGE SWITCH: This switch selects the output configuration; Bridge Mono, or Stereo / Dual Mono. 5 2 CONNECTION Inputs Connect low impedance microphones to the Mic inputs. If a paging microphone is being used, connect it to Mic Input 1 so it may be used with the Talk Over function. Connect source signals such as CD players, cassette players or video players to the RCA Source Inputs. If a jukebox is being connected, and you want its signal to mute the other source signals, connect it to Source input 1. For recording purposes, connect a stereo RCA cable to the Record Out jacks, and to your recording device. Amp Inserts To connect a signal processor to the MA2152 signal(s), use an insert plug, or cable wired as shown in Fig. This return signal is then sent to the output level section of the amplifier. Outputs In STEREO MODE, the Right speaker is connected to the red and black banana RIGHT OUTPU connectors. [. . . ] · Source 3 Priority: when in the up position, Source 1, and 2 will be "ducked" or muted by the signals at Source 1. With a jukebox connected to Source input 1, and the Talkover switch 2 on, the other Source input signals such as background music, will be muted and only the jukebox will be heard. · MONO / STEREO: When down, the output of the MA2152 is summed to mono. Either jack can be used as a mono output. FAULT PROTECTION The fault protection in the MA2152 limits the current to the output stage. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ROLLS MA2152




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ROLLS MA2152 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.