User manual ROCKTRON EGNATER

[. . . ] Do not use this product with any case, stand tripod, bracket or table that is not specified by the manufacturer. Unplug this apparatus during lightening storms or when unused during long periods of time. Servicing is required when the apparatus has been damaged in any way, such as power supply or plug is damaged, liquid has been spilled or objects have fallen into the apparatus or if the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped. DO NOT MAKE ANY INTERNAL ADJUSTMENTS OR ADDITIONS TO THIS EQUIPMENT AT ANY TIME OR TAMPER WITH INTERNAL ELECTRONIC COMPONENTS AT ANY TIME. [. . . ] FAILURE TO FOLLOW THESE INSTRUCTIONS MAY VOID THE WARRANTY OF THIS EQUIPMENT AS WELL AS CAUSING A SHOCK HAZARD. This unit is designed to operate between 32 F and 104 F (0 C and 40 C). This unit may not function properly under extreme temperatures. Introduction Congratulations on your purchase of the Rocktron X-Tune. A chromatic pedal tuner for guitar and bass, the X-Tune offers multi-LEDs and lighted notes that make it easy to tune on dark stages. Built in Rocktron's strong aluminum chassis, the X-Tune allows muting for silent tuning, and continuous out for live tuning. Like most Rocktron pedals, the X-Tune features an easy access battery compartment. Add this tuner to your stomp box setup and stay in the pedal world Enjoy Connection 1- Continuous Tuning Connection 2 - MUTE Silent Tuning Connection 3- Continuous Tuning with another stomp box Connection 4 - MUTE Silent Tuning with another stomp box. Descriptions Descriptions 1 Note Indicator LEDs -These LEDs show the note being tuned. The note indicated above the LED (see point 2) is actual note being tuned. Flat Indicator LED - this flashing LED will light if the note being played is flat. In Tune LED - when the note being played is "in tune" this LED will light. Tune the string down until the LED stops flashing and the "IN TUNE" LED lights. These letters indicate the notes in the standard tuning range for guitar. These notes will "light-up" when the X-Tune is turned on. . . this is ideal for tuning on dark or dimly lit stages. These LEDs are indicator lights for the notes A, B, C, D, E, F, and G These LEDs will light depending on the note being played. These LEDs are indicator lights for Sharp notes or flat notes - A# or Bflat, C# or Dflat, D# or Eflat, F# or Gflat, or G# These dots are the note indicators for A# or Bflat, C# or Dflat, D# or Eflat, F# or Gflat, or G#. 2 3 4 5 6 7 Tuning Instuctions Step 1 - plug the guitar/bass into the tuner - see "connections" section. In the example on the following page we are tuning the low E string on a guitar or bass. Pluck your E string, and if needed, adjust your tuning machine on your instrument until the LED under note "E" is lit (indicated as 1 in the preceding diagram). Step 3 - if your note is flat - the "FLAT" LED will light and flash. The speed of the flash will show you by "how much" your string is flat. Step 4 - if your note is sharp - the "SHARP" LED will light and flash. [. . . ] Step 4 - if your note is sharp - the "SHARP" LED will light and flash. The speed of the flash will show you by "how much" your string is sharp. Step 5 - Continue with step 3 or step 4 until the flat or sharp LED stops flashing and the blue "IN TUNE" LED lights. Step 6 - Continue steps 2-5 but using your other strings on your guitar or bass. Tuning Instructions Diagram Specifications Maximum Input Input Impedance Current Consumption Power Requirements -5dBu 470K 30mA DC9V>100mA built-in regulator * CE Approved * Hints and Tips: The X-Tune is sensitive - so it is not necessary to strike your string very hard standard string attack will work. [. . . ]