User manual REMINGTON MS3-3500

[. . . ] To disconnect, turn all controls to "Off", then remove plug from outlet, then detach power cord from the shaver for storage. S A shaver should never be left unattended when plugged in, except when charging your rechargeable shaver. S Close supervision is necessary when this shaver is used by, on, or near children or invalids. Congratulations on your purchase of a premium Remington® MicroScreen® 3 TCT® Shaver. [. . . ] Some signs that your screens and cutters need replacing are: s Irritation. As screens get worn, you may notice your skin feels more sensitive after a shave, particularly when you apply aftershave. As cutters wear, your shave may not feel as close, and you may feel your shaver is pulling at your whiskers. To prevent inadvertent damage to the Screen and Cutter Assembly, do not attempt to remo ve them unless you are replacing them. To remove the old screens and cutters follow the instructions that come with the screen and cutter replacement package. It's always a good idea to replace the screens when you replace the cutters. S Remove the shaver head by squeezing on both side buttons and pulling away from the body of the shaver. You may blow out the stubble thoroughly, or rinse the shaver head in water. Important: Never clean the screen with the enclosed brush as damage may occur to the holes in the screen. S At least once a week, the cutters and the trimmer should be cleaned with the cleaning brush. Do not use any aggressive cleansing agent as this ma y destroy the shaver coatings. S To clean and lubricate your shaver's cutters and head assembly, apply Remington Shaver Saver® (SP-4) Lubricant. A quick spray after each shave keeps your shaver operating at peak Before operating your MicroScreen ®3 TCT® Shaver, remove the headguard, which protects the screen and cutter assembly. Your shaver has a Toggle Power Button that has different operating characteristics depending on which model shaver you have. S Your shaver cannot be overcharged, so you can leave it plugged in and charging between shaves. The MS3-2000/3000/-4000/-0004/-3500/-4500 on the other hand, come with a special feature that allows you to run the shaver directly off the cord. Your shaver will not recharge while you are shaving, so after shaving directly from the cord, turn the unit off and set aside to charge. S The MS3-2000/-3000/-4000/-0004/-3500/-4500 will provide up to two weeks worth of shaving after a one hour charge or a single shave after five minutes of charging. Model MS3-2000 has a green indicator light to show whether the shaver is either fully charged or charging. A red low-battery indicator illuminates to show when the shaver needs recharging. This also indicates approximately 5 minutes of shaving time left when indicator first comes on. Model MS3-3000/-3500 features a green lighted fuel gauge that displays the amount of charge remaining in 20% increments. [. . . ] Remington will reimburse all retailers who accept shavers within 30 days from date of purchase. If you have any questions regarding this money-back guarantee, please call 1-800-736-4648 in the U. Remington warrants that your product, except as noted below, is, on date of purchase, free from defect in material and workmanship. If you wish, you may mail the product, postpaid, to Remington Products Company, L. [. . . ]