User manual PRINCETON SEN714

[. . . ] Table of Contents Tips and safety precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Height adjustment, angle adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Connecting the monitor and turning the monitor on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If it is not selected, press the / MODE button and select [BACKLIGHT]. Note - On Screen display for adjustment disappears several seconds after the last operation. 8 Adjusting the screen display and speaker volume 1. 31 31 /MODE Adjusting the speaker volume Setting GAMMA Color tone or brightness can be changed with one Command. GAMMA1 Displays image with the color tone results from original scheme of liquid crystal panel. The brightness is set to a level that is easier on the eyes than with other modes and saves power. GAMMA3 GAMMA3 color conversion, account of liquid crystal's characteristics and represents color tone close to its original image. How to set Press the / Mode button when the OSD Menu is not displayed. (GAMMA1 GAMMA2 GAMMA3 GAMMA4 GAMMA1) On Screen display for adjustment for adjustment disappears several seconds after the last operation. button (darker) or Note - On Screen display for adjustment disappears several seconds after the last operation. 9 Adjusting the screen display (When using an analog signal) Automatic screen adjustment Options in the SCREEN Menu can be adjusted automatically (CLOCK, PHASE, H-POS, V-POS). Note - When setting up this monitor for the first time or after having changed an aspect of the current system, perform an automatic screen adjustment before use. (Example: Displayed screen of the L17HMN 00ABA) SCREEN MANUAL MANUAL CLOCK PHASE H-POS V-POS AUTO 127 16 127 32 INPUT-1 ANALOG 1280x1024 V:60Hz H:64. 0kHz Notes - In most cases automatic adjustment is sufficient. - It may not be possible to achieve correct adjustment with the first automatic adjustment. - If necessary due to any of the following, manual adjustments (P11) can be performed after the automatic adjustment. - When the computer's video input signals are Composite Sync or Sync On Green. (Automatic adjustments may not be possible. ) - When [OUT OF ADJUST] is displayed. (When the screen displays an entirely dark image, the automatic screen adjustment may be disabled. When marking an automatic adjustment, be sure to either use the Adjustment Pattern or try displaying an image that makes the entire screen very bright. ) - Automatic adjustment may not be achieved correctly depending on what is displayed on the screen ­ moving picture or the MS-DOS prompt etc. 2. Press the MENU button 4 times to make the On Screen Display (OSD) Menu disappear. 10 Adjustment the screen display (When using an analog signal) Manual screen adjustment Adjustments can be made using On Screen Display (OSD) Menu provided. On Screen Display for adjustment This chapter provides the procedure how to adjust the screen by using operation Pattern. The SCREEN Menu will be displayed. SCREEN MANUAL MANUAL CLOCK PHASE H-POS V-POS AUTO 127 16 127 32 Note - Press the button to select [AUTO]. - To choose a menu option: / MODE button - To go to the next menu: MENU button CLOCK This feature will increase or decrease vertical picture alignments. ( buttons ) PHASE This feature will increase or decrease horizontal picture alignments. ( buttons ) NOTE - Adjustments to [PHASE] should be made only after [CLOCK] has been correctly set. INPUT-1 ANALOG 1280x1024 V:60Hz H:64. 0kHz At this point relevant menu options can be adjusted. [. . . ] Follow your computer's instruction manual to set the timing so that it is compatible with the monitor. - If the monitor is not receiving any signal (synch signal), [NO SIGNAL] will appear. - Recommended resolution is 1280×1024. - Frequency for Power Macintosh and the Sun Ultra series are reference values. - If the monitor is receiving timing signals that are not compatible, [OUT OF TIMING] will appear. [. . . ]