User manual PRIMERA LX900E REWINDER BROCHURE

[. . . ] This document contains proprietary information that is protected by copyright. No part of this document may be photocopied, reproduced, or translated into another language without prior written consent. Trademark Acknowledgments: Windows is a registered trademark of Microsoft Corporation. All other trademarks are the property of their respective owners. Printing History Edition 1. 0, #110124, Copyright 2011, All rights reserved. FCC Compliance Statement: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ] If any of this information is incorrect, use the back arrow at the bottom of the screen to go back to appropriate window to correct it. Use this option to change the robot to which this project will be sent. With a 4102 connected you can choose to burn to both drives or the top or bottom drive only. This is only available in the DVD Video and ISO image Project with purchase of PTProtect USB dongle. This option allows you to add a project to a new or existing project set. At the top of the summary window you can type the name of your job and then click save to save it anywhere on your computer. A project file is a small file that holds the locations of files to be burned, the location of the print file to be printed, and any specific project settings such as burn speed and number of copies. Note: A saved project file does not include the data to be burned or the print file to be printed. If these files are moved or deleted, the project file will need to be edited to reflect these changes. Click this button to schedule this job to run daily, weekly or monthy at a specific time. Project Options For any job type you can click on the Options button for additional options for that job. If this option is checked, all files on the disc will automatically be set to the current time and date. B. 3 Robot Options / Bin Selection Double click on the bin icons at the bottom of the screen to access these settings. Here you can designate the type of media in the left and right bins and finished bin location. By default, PTPublisher assumes that discs are loaded into only the right bin. It picks from the right bin and places completed discs in the left bin. Check Kiosk Mode to make the robot pick blank media from both the right and left bins. Kiosk Mode still requires the same type of media in both the right and left bins. Enable Bin Selection to use different types of media in the left and right bins. Once Bin Selection is enabled the contents of the bin will be reflected next to the bin icons. To take advantage of this feature choose a specific type of media on step one of the data project. Other project types will automatically select the correct type of media. When you queue multiple projects with different media types the robot will now choose from the left or right bin depending on what media type is selected in the project and set for the bin. [. . . ] To access these settings on a Mac go the the PTPublisher Menu - Preferences. TRANSPORTING THE PUBLISHER To prevent damage to the Publisher's robotic arm during shipment, it is important to properly secure it. To prepare for transport, remove the ink cartridges and disc holders, close the front cover and then do the following: 1. While continuing to hold the Cartridge Button, switch on power to the unit. Continue to hold the Cartridge Button for five seconds. [. . . ]