User manual PHILIPS SHB1400

[. . . ] • The integrated battery shall not be exposed to excessive heat such as sunshine, fire or the like. Disposal of your old product Danger •• To avoid hearing damage, limit the time you use the headphones at high volume and set the volume to a safe level. The louder the volume, the shorter is the safe listening time. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Be sure to observe the following guidelines when using your headphones. [. . . ] The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. is under license. General information To avoid damage or malfunction: • Do not expose the headset to excessive heat. • Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives. • If cleaning is required use a soft cloth, if necessary dampened with a minimum amount of water or diluted mild soap, to clean the product. 4 EN • Philips Bluetooth headset SHB1400 • Earhook • Quick Start Guide Compatibility Your headset is compatible with Bluetooth enabled mobile phones. It features Bluetooth verson 2. 1+EDR but will also work with devices featuring other Bluetooth versions that support the Headset (HSP) or Handsfree (HFP) Bluetooth profile. EN 5 English 3 What’s in the box 4 Overview of the headset c d a b e f a Ear cap b VOL -/VOL +: Volume button c LED d : Function button e Mic f USB cap 6 EN Charge the headset Note •• Finish your call before charging the headset, as connecting the headset for •• During charging, you can operate the headset normally. charging will power off the unit. Before you use the headset with a mobile phone for the first time, pair it with the mobile phone. A successful pairing establishes a unique encrypted link between the headset and the mobile phone. If you try to pair more than eight devices, the link for the earliest paired device is overwritten. 1 2 3 4 1 2 Ensure that the headset is charged and turned off. Ensure that the mobile phone is turned on and its Bluetooth feature is activated. »» The headset is in pairing mode, which lasts five minutes. For details, refer to the user manual of the mobile phone. 1 Remove the USB cap. A sample pairing is shown below. • Enter “ 0000 ” (4 zeros), if prompted to enter the pin code of the headset. On mobile phones using Bluetooth 2. 1+EDR or higher, you may not need to enter a pass code. 2 Plug the headset into a powered USB port on a PC or into a power adaptor with USB outlet. Settings Connectivity Settings Settings Connectivity Bluetooth Devices Found Add Bluetooth device Philips SHB1400 Enter Password Select Back Select Back Select Back »» When the pairing is successful, a long beep occurs and the LED on the headset starts to flash blue every 3 seconds. »» During charging, the LED turns red. The LED turns off when the headset is fully charged. Tip •• Typically, a full charge takes 2 hours. EN 7 English 5 Get started Pair the headset with your mobile phone 6 Fit your headset 1 Place the earbud in your ear and rotate the headset upwards or downwards until it fits your ear securely. Optional (with an earhook) For an extra-secure fit, you can attach the earhook: Push the ball joint between the earbud and the main body of the headset. Adjust the earhook for providing the best fit. 8 EN Connect the headset to a mobile phone 1 With the mobile phone turned on, press until the LED lights up, to turn on the headset. [. . . ] • Turn the currently connected device off or move it out of range. Pairings may have been reset or headset has been previously paired with other device. [. . . ]