User manual PHILIPS SBCSC490

[. . . ] · · · · · · · · · · · Baby Unit (transmitter unit) Parent Unit (receiver unit) Docking base for the Parent Unit Camera Unit Mounting gear for the Camera Unit Audio/Video RCA connection cable for connection to a TV with RCA connectors Scart/RCA Audio/Video adapter for connection to a TV with Scart connector 2 AC Power adapters NiMH battery pack Instructions for use Babycare range overview leaflet Contents Help line 2 Important information 4 Functional overview 6 Getting the baby cam ready 7 Operating the baby cam 11 Technical specifications 15 Problem solving 16 General notes 19 XP SBC SC 490 14-02-2003 16:43 Pagina 6 6 ENGLISH Functional overview Product illustrations on inside flap A) Baby Unit 1 POWER button switches the Baby Unit on and off 2 Battery check light ( ) blinks red when battery power is low 3 SYSTEM check light lights green: power on lights orange: transmitting sound (in baby monitor mode) blinks/lights red: Baby Unit not OK 4 Microphone 5 SENSITIVITY control adjusts the microphone sensitivity when the Baby Cam is used as a regular Baby Monitor 6 INPUT CAMERA camera connection 7 Battery compartment 8 CHANNEL selector selects the required channel (A, B, C or D)* 9 DC 12V --<± DC power supply socket for connection to the mains 10 AC power adapter * Amount of available channels may vary per country due to local regulations. B) Camera Unit 11 Camera 12 Camera foot XP SBC SC 490 14-02-2003 16:43 Pagina 7 ENGLISH 7 C) Parent Unit 13 Sound LEVEL lights indicate the baby's sound level 14 Battery check light ( ) blinks red when battery power is low 15 SYSTEM check light lights green: power on/connection OK blinks red: connection not OK lights red: connection not OK for more than 2 minutes 16 ON VOLUME OFF control - switches the Parent Unit on and off - adjusts the Parent Unit's volume 17 Loudspeaker to hear the baby System check alarm - beeps if the Baby Unit is out of range - beeps in case of no connection for more than two minutes 18 CHANNEL selector selects the required channel (A, B, C or D)* 19 Battery compartment 20 System check alarm switch (inside battery compatment) switches the System Check alarm on or off *) Amount of available channels may vary per country due to local regulations. Docking base 21 CHARGE light - blinks red when charging - lights red when fully charged 22 DC 12V --<± DC power supply socket for connection to the mains 23 OUTPUT TV to connect the docking base to the TV 24 AC power adapter XP SBC SC 490 14-02-2003 16:43 Pagina 8 8 ENGLISH Getting the Baby Cam ready The wireless Baby Cam can be used in several ways: - as a baby observation system enabling you to watch and hear your baby on your TV. When the Parent Unit docking base is connected to the TV via Scart connection you can even record the baby on VCR or DVD recorder. - as a regular baby monitor allowing you to hear your baby in and around the house. In both situations the units can be mains- as well as battery operated. [. . . ] Use rechargeable NiMH battery packs only! A A CHANNEL CHANNEL B C D B C D DC12V OUTPUT TV 4 Connect the AC power adapter (24) to a mains socket and the cord to the DC 12V --<± socket (22) of the docking base. DC12V OUTPUT TV 5 Place the Parent Unit inside the docking base. > The Parent Unit can be operated now, but you should leave it in the docking base until the battery pack is fully charged (at least 14-16 hours). > When the battery check light (14) flashes red, the battery power is low. Place the Parent Unit inside the docking base to recharge the battery pack. Operating the Baby Cam Channel selection A CHANNEL BCD 1 Use the CHANNEL selector (8) on the Baby Unit to select the required channel. A A CHANNEL CHANNEL BC CD D B 2 Use the CHANNEL selector (18) on the Parent Unit to set the Parent Unit to the same channel as the Baby Unit. · If there is interference or if sound reception is poor, try repositioning the units (Baby Unit first) or set both units to another channel. > The sound-LEVEL lights (13) visually alert you to baby's sounds. The more sound your baby makes, the more lights light. ON VOLUME OFF XP SBC SC 490 14-02-2003 16:43 Pagina 14 14 ENGLISH Recording your baby You can make home videos without disturbing your playing child by recording the Baby Cam images using your VCR or DVD Recorder. Because your baby is completely unaware of being filmed, you get natural video of the most special times. 1 Connect the babycam to your recording device using the RCA cable and or RCA/Scart connector supplied. 3 Prepare the recording device and insert a video tape or recordable DVD. 4 Press RECORD on the recording device to start recording. Using the Baby Cam as a regular baby monitor When used as a regular baby monitor, the Baby Cam allows you to hear your baby in and around the house. 1 Disconnect the camera from the Baby Unit's INPUT CAMERA input (6). > You can now move anywhere in and around the house still hearing your baby. Adjusting microphone sensitivity of the Baby Unit · Adjust the microphone sensitivity of the Baby Unit to the preferred level using the - SENSITIVITY + control. > The SYSTEM check light lights orange when the Baby Unit starts transmitting. SYSTEM ­ SENSITIVITY + XP SBC SC 490 14-02-2003 16:43 Pagina 15 ENGLISH 15 Operating range When used cordlessly the Baby Cam operating range will be limited by walls, ceilings, large objects and even glass. Depending on your local circumstances the operating range can decrease down to approximately 30 metres. The system check function (lights 3, 15 and beeping sound on the Parent unit) will in principle indicate to you the reliability of the connection between the Parent unit and Baby unit and whether you are out of range. Technical specifications Power supply: ­ Battery pack; rechargeable NiMH for Parent Unit (included) ­ Optional batteries 6 x 1. 5V; AA for Baby Unit (not included) ­ AC power adapter 230V AC, 50 Hz Up to 100 metres in ideal open air conditions. Indoors the range may decrease to approximately 30 meters Operating range: Operating temperature: +5 °C to +45 °C TV requirements: PAL standard Only use the AC/DC power adapter included. XP SBC SC 490 14-02-2003 16:43 Pagina 16 16 ENGLISH Problem solving If a fault occurs, first check the points listed below. If you are unable to remedy a problem by following these hints, contact the helpline (see next paragraph) or consult your dealer. Under no circumstances should you try to repair the set yourself as this will invalidate the guarantee. Problem SYSTEM check light does not light Possible cause Parent Unit Unit is not switched on. [. . . ] Peripherals & Accessories dat het toestel SBC SC490 in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Peripherals & Accessories dichiara che questo SBC SC490 è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Peripherals & Accessories declara que este SBC SC490 está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE. Peripherals & Accessories SBC SC490 1999/5/ Härmed intygar, Philips Consumer Electronics, B. U. [. . . ]