User manual PHILIPS PERFECTCARE VIVA GC7035

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual PHILIPS PERFECTCARE VIVA GC7035. We hope that this PHILIPS PERFECTCARE VIVA GC7035 user guide will be useful to you.


PHILIPS PERFECTCARE VIVA GC7035 : Download the complete user guide (5663 Ko)

Manual abstract: user guide PHILIPS PERFECTCARE VIVA GC7035

Detailed instructions for use are in the User's Guide.

[. . . ] -- You can continue steam ironing for 1 hour while the Calc-Clean light flashes and the appliance beeps. You have to perform the Calc-Clean process before you can continue steam ironing. €7) Performing the Calc-Clean process with the Calc-Clean container Do not leave the appliance unattended during the Calc-Clean process. Caution: Do not interrupt the process by lifting the iron up from the Calc-Clean container, as hot water and steam will come out of the soleplate. [. . . ] 2 Make sure that the appliance is plugged in and switched ON during the Calc-Clean process (Fig. 3 Place the Calc-Clean container on the ironing board or any other even, stable surface (Fig. 5 Press and hold the Calc-Clean button for 2 seconds until you hear short beeps (Fig. It is perfectly safe to rest the iron on this container during the entire process. 6 During the Calc-Clean process, you hear short beeps and a pumping sound. Wait approximately 2 minutes for the appliance to complete the process (Fig. 7 When the Calc-Clean process is completed, the iron stops beeping (Fig. 8 Wipe the iron with a piece of cloth and put it back on the base station (Fig. 9 As the Calc-Clean container becomes hot during the Calc-Clean process, wait approx. 10 Carry the Calc-Clean container to the sink, empty it and store it for future use (Fig. Make sure that you empty the Calc-Clean container before you start the Calc-Clean process. Let the iron heat up until the ‘iron ready’ light lights up steadily. After the Calc-Clean process, remaining water may drip out of the soleplate. Impurities or chemicals present in the water have deposited in the steam vents and/or soleplate. You have accidentally started the Calc-Clean process (see chapter ‘IMPORTANT Cleaning and maintenance’). You have not pressed the Calc-Clean button for 2 seconds until the appliance started beeping. The surface to be ironed was uneven, for instance because you were ironing over a seam or a fold in the garment. The shine or imprint is not permanent and will disappear when you wash the garment. Avoid ironing over seams or folds or you can place a cotton cloth over the area to be ironed to avoid imprints. You can also add an extra layer of felt material under the ironing board cover to prevent condensation on the ironing board. Put an extra layer of felt material under the ironing board cover to prevent condensation on the ironing board. The ironing board cover becomes wet or water droplets come out of the soleplate. [. . . ] Put an extra layer of felt material under the ironing board cover to prevent condensation on the ironing board. The ironing board cover becomes wet or water droplets come out of the soleplate. Steam has condensed on the ironing board cover after a long ironing session. You may have an ironing board that is not designed to cope with the high steam rate of the steam generator. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS PERFECTCARE VIVA GC7035




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS PERFECTCARE VIVA GC7035 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.