User manual PHILIPS MC-M350

[. . . ] Micro Hi-Fi System MC-M350 1 Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: Italia DICHIARAZIONE DI CONFORMITA' Si dichiara che l'apparecchio MC-M350 Philips risponde alle prescrizioni dell'art. Fatto a Eindhoven Philips Consumer Electronics Philips, Glaslaan 2 5616 JB Eindhoven, The Netherlands 1 2 3 Remove fuse cover and fuse. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. [. . . ] ­ Track number and elapsed play time of current track ­ Track number and remaining play time of current track CD PROGRAM playback mode G Press DISPLAY repeatedly, following information will be displayed consecutively ­ Track number and elapsed play time of current track ­ Track number and remaining play time of current track ­ Current program number and track number Select CD source. READING is displayed as the CD player scans the contents of a disc, and then the total number of tracks and playing time are shown. In MP3-CD mode G Press DISPLAY repeatedly to select different display modes : Number, Track, Album and ID3. ID-3 ID-3 tag scrolls once and elapsed play time. Playing a disc G CD-ROM, CD-I, CDV, VCD, DVD or computer CDs, however, are not possible. 1 2 3 12 CD/ MP3-CD Operation Selecting a different track G Press or once or repeatedly until the desired track number appears in the display. G If you have selected a track number shortly after loading a disc or in the PAUSE position, you will need to press to start playback. 2 3 Press to start playback if in the STOP position. To return to normal playback, press the respective SHUFFLE or REPEAT button until the various SHUFFLE / REPEAT modes are no longer displayed. Finding a passage within a track (CD disc only) 1 2 Press and hold down on or . Note: ­ During a disc programme or if SHUFFLE/ REPEAT active, searching is only possible within the same track. G You can also press STOP 9 to cancel your play mode. Note: ­ If Shuffle is activated on a MP3-CD, all titles stored in the disc will be played in random order. Programming track numbers Program in the STOP position to select and store your disc tracks in the desired sequence. Press PROG/ REV (or PROGRAM/ REV on remote control) to enter the programming mode. Use the or (11 or 22 on the remote control) to select your desired track number. Press PROG/ REV (or PROGRAM/ REV on remote control) to confirm the track number to be stored. MEMORY FULL is displayed if you attempt to program more than 40 tracks. To start playback of your disc program, press STOP 9 followed by or press directly. 1 Selecting a desired ALBUM/ TITLE (Track) (MP3 disc only) To select a desired Album G Press or (11 or 22 on the remote control) repeatedly. To select a desired Title(Track) G Press or (¡ or TM on the remote control) repeatedly. 2 3 4 Different play modes: SHUFFLE and REPEAT You can select and change the various play modes before playback. tracks of the entire disc are played in random order SHUFFLE and REPEAT ALL. . . to repeat the entire disc continuously in random order REPEAT ALL . . . . plays the current track continuously To select your play mode, press the SHUFFLE or REPEAT on the remote control before playback until the display shows the desired function. (SHUF, REPEAT, REPEAT ALL) 5 Erasing the program You can erase the program by: G pressing STOP 9 twice during playback; G opening the CD compartment; PROGRAM disappears from the display. G selecting another sound source 1 13 English Radio Reception English Programming radio stations You can store up to a total of 40 radio stations in the memory. Automatic programming Automatic programming will start with a chosen preset number. From this preset number upwards, former programmed radio stations will be overridden. The system will only program stations which are not in the memory already. 1 Press PRESET or to select the preset number where programming should start. Note: ­ If no preset number is selected, default is preset (1) and all your presets will be overridden. Tuning to radio stations 1 2 Select TUNER source. [. . . ] <6W Eco power standby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <0. 5W Subject to modification 19 English Maintenance English Cleaning the Cabinet G Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. Cleaning Discs G When a disc becomes dirty, clean it with a cleaning cloth. [. . . ]