User manual PHILIPS FLATTV 20PF4321

[. . . ] 15PF4121 20PF4121 20PF4321 23PF4321 Introduction Thank you for purchasing this television set. This handbook has been designed to help you install and operate your TV set. English 1 Table of Contents Installation Presentation of the LCD Television . . 14 Recycling ° The packaging of this product is intended to be recycled. Apply to the local authorities for correct disposal. [. . . ] If the counter continues to search, this means that the page is not transmitted. Direct access Coloured areas are displayed at the bottom of the screen. to the items The 4 coloured keys are used to access the items or corresponding pages. The coloured areas flash when the item or the page is not yet available. Stop Certain pages contain sub-pages which are automatically sub-page displayed successively. This key is used to stop or resume acquisition sub-page acquisition. The indication _ appears top left. Double page To activate or deactivate the double page teletext display teletext mode. The active page is displayed on the left and the (depending on version) following page is displayed on the right. the contents page). The active page is then displayed on the right. To return to normal mode, press Å. Hidden To display or hide the concealed information (games information solutions). Enlarge a This allows you to display the top or bottom part of the page page and then return to normal size. Favourite Instead of the standard coloured areas displayed at the bottom of pages the screen, you can store 4 favourite pages on the first 40 channels which can then be accessed using the coloured keys (red, green, yellow, blue). Once set, these favourite pages will become the default every time teletext is selected. " Press the coloured key of your choice for 3 seconds. The page is now stored. ( Now when you consult teletext, your favourite pages will appear in colour at the bottom of the screen. To temporarily retrieve the standard items, press MENU. To clear everything, and return the standard items as the default, press Ë for 5 seconds. 9 Using in PC monitor mode NOTE ­ When using the LCD TV as a PC monitor, slight diagonal interference lines may be observed when it is operated under electromagnetic interference environment but will not affect the performance of this product. ­ For better performance, good quality DVI cable with good noise isolation filter is recommended. You must first of all connect the computer and adjust the resolution (see p. 13). Choosing PC mode & Press the AV key on the remote control to display the Source List. é Use the cursor </> key to select PC and then press the cursor key to switch the TV to PC mode (DVI-I In). To return to TV mode, press the AV key, select TV and validate with key. Using the PC menus Press the MENU key to access the specific settings of the PC monitor mode. Use the cursor to adjust them (the settings are automatically saved): · Picture: - Brightness / Contrast : to adjust the brightness and contrast. - Horizontal / Vertical: to adjust the horizontal and vertical placing of the image. [. . . ] System: Television pictures are not broadcast in the same way in all countries. There are different standards: BG, DK, I, and L L'. The System setting (p. 6) is used to select these different standards. This is not to be confused with PAL or SECAM colour coding. Pal is used in most countries in Europe, Secam in France, Russia and most African countries. The United States and Japan use a different system called NTSC. The inputs EXT1 and EXT2 are used to read NTSC coded recordings. 16:9: Refers to the ration between the length and height of the screen. Wide screen televisions have a ration of 16/9, conventional screen TV sets have a ration of 4/3. Table of TV frequencies. [. . . ]