User manual PHILIPS FC9306/01

[. . . ] as a result , the dustbag-full indicator will indicate that the dustbag is full. Replace the dustbag, even if it is not full yet (see chapter ‘Maintenance’). -- During vacuum cleaning, especially in rooms with low air humidity, your vacuum cleaner builds up static electricity. As a result you can experience electric shocks when you touch the tube or other steel parts of your vacuum cleaner. [. . . ] 2 Store accessories in the accessory holder by pushing them into the holder. Note:The small nozzle must be placed in the accessory holder as shown in the picture. Using the appliance 1 Pull the cord out of the appliance and put the mains plug in the wall socket. English 2 To switch on the appliance, press the on/off button on top of the appliance. Tip:To avoid bending your back, press the on/off button with your foot. 3 To switch off the appliance, press the on/off button on top of the appliance. 9 Adjusting suction power 1 During vacuum cleaning, you can adjust the suction power with the selection wheel on top of the appliance. -- Use maximum suction power to vacuum very dirty carpets and hard floors. 3 To ensure stable parking of the telescopic tube, adjust the tube to the shortest length. 4 To continue vacuum cleaning, simply press the on/off button on top of the appliance to switch on the appliance. When it is on its wheels, there is a handle on top which enables you to easily move the cleaner around with very little bending. The second handle on the front side of the appliance enables you to comfortably carry it around in an upright position. 1 Switch off the appliance and remove the mains plug from the wall socket. To attach the nozzle to the appliance,  insert the ridge on the nozzle into the storage slot. -- To ensure stable parking of the telescopic tube, adjust the tube to the shortest length. Tip:We advise you to wrap the hose around the tube to ensure stable parking and to save even more space when you store the appliance. Maintenance Always unplug the appliance before you clean the appliance, before you replace the dustbag and before you replace the filters. Dustbag Note: In some cases, the dustbag-full indicator can indicate that the dustbag is full, even though it is not. When you have vacuumed ashes, fine sand, lime, cement dust and similar substances) or if something is blocking the nozzle, tube and/or hose. If the pores of the dustbag are clogged, you have to replace the dustbag, even if it is not full yet. If the dustbag is not clogged but not full either, something is blocking the nozzle, tube and/or hose. -- Replace the dustbag as soon as the dustbag-full indicator has changed colour permanently, i. [. . . ] 14 English -- Philips Anti-odour s-bag ` synthetic dustbags are available under type number FC8023. Ordering filters -- HEPA 13 filters are available under type number FC8038. -- Motor protection filters are available under service number 4822 480 10228. * * You can buy motor protection filters in the Philips online shop by clicking ‘accessories and spare parts’ or you can contact the Philips Consumer Care Centre in your country. [. . . ]