User manual PHILIPS DCM378

[. . . ] · Unplug this apparatus during lightning storms or when unused for long periods of time. · · Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Battery usage CAUTION ­ To prevent battery leakage which may result in bodily injury, property damage, or damage to the unit: Install all batteries correctly, + and - as marked on the unit. [. . . ] Refer to the Specifications section of this manual. Tip · For optimal reception, fully extend and adjust the position of the antenna. · For better FM stereo reception, connect an outdoor FM antenna to the FM ANTENNA socket. · The unit does not support MW radio reception. 1 1 Insert the speaker wires completely into the speaker input sockets on the back of the unit. Connect the supplied FM antenna to the FM ANTENNA socket on the main unit. Connect power Caution · Risk of product damage!Ensure that the power supply · · voltage corresponds to the voltage printed on the back or the underside of the unit. When you unplug the AC power cord, always pull the plug from the socket. Before you connect the AC power cord, ensure that you have completed all other connections. 10 EN 1 Prepare the remote control Caution · Risk of explosion!Never discard batteries in fire. Note · If no button is pressed in 30 seconds, the system exits clock setting mode automatically. Turn on 1 Press . » The unit switches to the last selected source. For first-time use: 1 Remove the protective tab to activate the remote control battery. To replace the remote control batteries: Switch to standby mode 1 Press for over 3 seconds to switch the unit to Eco Power Standby mode. To switch the unit to standby mode: 1 In Eco Power Standby mode, press for over 3 seconds. If play does not start, press / to select a track, then press . Flip open the cover marked on the front panel. Then press OK to start play. Adjust sound During play, you can adjust volume through following operations. To enable treble enhancement. MUTE LOUDNESS BASS TREBLE 12 EN 5 Play iPhone/iPod You can enjoy audio from iPhone/iPod through this unit. Compatible iPhone/iPod The unit supports the following iPod and iPhone models: Made for. · iPod classic · iPod with color display · iPod with video · iPod nano (1st/2nd/3rd/4th/5th generation) · iPod Touch (1st/2nd/3rd generation) Works with. · iPhone · iPhone 3G · iPhone 3GS Listen to the iPhone/iPod 1 2 Press iPhone/iPod to select the iPhone/iPod source. Open the iPhone/iPod dock on the top panel. · · · · To pause/resume play, press . To search during play: press and hold / , then release to resume normal play. To navigate the menu: press MENU and / to select, then press OK to confirm. Note · When iPod/iPhone source is selected, you cannot enjoy audio through the headphone socket. Charge the iPhone/iPod When the unit is connected to power, the docked iPhone/iPod begins to charge. Remove the iPhone/iPod 1 2 3 Place the iPhone/iPod in the dock. Press down to hide the dock. EN 13 E ng lish 6 Listen to FM radio Tune to FM radio stations Warning · Ensure that you have connected and fully extended the supplied FM antenna. » The preset number and the frequency of the preset station are displayed. 4 Repeat steps 2-3 to program other stations. Note · To overwrite a programmed station, store another station in its place. 1 2 3 Press FM. » The FM tuner tunes to a station with strong reception automatically. Repeat steps 2-3 to tune to more stations. Tune to a preset radio station 1 Press / to select a preset number. Show RDS information RDS (Radio Data System) is a service that allows FM stations to show additional information. If you tune to a RDS station, a RDS icon and the station name are displayed. [. . . ] Remote control does not work · Before you press any function button, first select the correct source with the remote control instead of the main unit. · Insert the battery with its polarities (+/­ signs) aligned as indicated. · Aim the remote control directly at the sensor on the front of the unit. · Check if the disc is inserted upside down. E ng lish EN 17 · · · Wait until the moisture condensation at the lens has cleared. [. . . ]