User manual PHILIPS CDR802

[. . . ] To change a fuse in this type of plug proceed as follows: 1 2 3 Remove fuse cover and fuse. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. if the mains plug contains a fuse , this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. [. . . ] This feature allows to display information such as album title or track title contained on a specially encoded CD. cD TEXT is shown and the album title and album artist's name is scrolled once. CD text when playback is stopped Press CD TEXT/edit to see the following information, which will be scrolled once (if available): ­ Album artist's name ­ Album title CD text during playback Press CD TEXT/edit to see the following information, which will be scrolled once (if available): ­ Track artist's name ­ Track title ID3-tag This feature allows the display of information such as album title or track title contained on an MP3-track. Repeating disc(s), a track or a program Press REPEAT on the remote control repeatedly during play to select: REPEAT TRACK: the current track will be repeated; REPEAT DISC: the current disc will be repeated; REPEAT ALL: all discs in the set or all discs/tracks in the program will be repeated. To return to normal play, press REPEAT on the remote control one or more times until: The REPEAT label disappears from the display. Note: REPEAT DISC is not possible during SHUFFLE or while playing a program. If you created an ID3-tag on your MP3-CD, press CD TEXT/edit during playback to display the following ID3tag information: ­ Album title ­ Track artist's name ­ Track title Erasing tracks Select the tracknumbers you wish to erase with 5 or 6 and erase each number by pressing NO. The next programmed track number will move up to this position and is displayed together with the step number and the total program time. Adding tracks Rotate the ¡ EASY JOG TM control to select the tracknumbers you wish to add to the program and store each track by pressing YES. The number of programmed tracks (STEP), PROG and the total program time are displayed. ­ A program can be composed of tracks in both changer and recorder deck. ­ Any track can be stored more than once with a maximum of 99 tracks. ­ If you exceed the maximum of 99 tracks the display shows PROGRAM FULL. If you wish to store all tracks of the selected disc, rotate the ¡ EASY JOG TM control to select ALL and press YES to store the complete disc in the memory. The number of programmed tracks (STEP), PROG and the total program time are displayed. If the program is used for recording only tracks from discs in the changer should be programmed. We will describe: ­ Recording from internal CD changer ­ Recording from an external source ­ Finalizing CDR(W) discs: Finalizing a CDR(W) disc is a simple procedure, necessary to: ­ play a recorded CDR on a standard CD player; ­ play a recorded CDRW on a CDRW compatible CD player. Always the already recorded tracks of the CDR(W) disc will be taken as reference for the volume level of the following recordings. Auto level control becomes automatically active, when: ­ COMPILE CD is being used, ­ a disc, a track or a track edit is being high speed recorded and the CDR(W) has recordings on it, or ­ a program (consisting from more than one disc) from the CD changer is being high speed recorded. Auto level control will not become active, when: ­ using COPY CD, ­ making recordings from an external source, or ­ making normal recordings in listen mode. Make sure that the CDR(W) is absolutely free of scratches and dust particles. Else, DISC FULL is displayed and you cannot enter into the record mode. [. . . ] You can also use the SPACE button on the remote control to insert a space. Deleting and substituting a character Press 5 or 6 to move to the characters position to be deleted or substituted. If you want to substitute the character: Rotate the ¡ EASY JOG TM control to select a new character. Erasing text Text erasing is only possible when the CDR(W) is not finalized yet. [. . . ]