User manual PHILIPS CDR796

[. . . ] If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. if the mains plug contains a fuse , this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. Note:The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere. [. . . ] You can select up to 99 tracks (also MP3 tracks) and store them in the memory. It is possible to store any track more than once, in any order over CD player and CD recorder. However, it is not possible to combine MP3 tracks and audio tracks or MP3 tracks from more than one CD. To return to normal playback press REPEAT on the remote control until the display indication disappears. Playing tracks in random order The step number (STEP), the track number and playing time of the actual track on the current CD are displayed. SHUFF ALL is shown and either all tracks of the program or of all loaded disc(s) in the CD player and CD recorder are played in random order. 3 If you wish to choose a track from the CD player: Press CD on the remote control and then í or ë as often as necessary to skip to the desired track. If you wish to choose a track from the CD recorder: Press CDR on the remote control and then í or ë as often as necessary to skip to the desired track. Note:When selecting a track which has been stored already, P will be displayed. This feature allows you to display information such as album title or track title contained on a specially encoded CD. cD TEXT is shown and the album artist's name and album title is scrolled once. CD text when playback is stopped Press CD TEXT/edit on the remote control to see the following information, which will be scrolled once (if available): Album artist's name Album title CD text during playback Press CD TEXT/edit on the remote control to see the following information, which will be scrolled once (if available): Track artist's name Track title The total number of programmed tracks (STEP), PRG and the total program time are displayed. Note: If you try to store more than 99 tracks, PROGRAM FULL will be displayed. The CD recorder deck offers you 3 main functions: ­ Recording from the internal CD player or from a selected external source ­ Finalizing your CDR(W) discs and unfinalizing your CDRW discs ­ Erasing a CDRW disc The recording procedure is the same for CDR and CDRW discs. Make sure the CDR(W) is absolutely free of scratches and dust particles. If the recording time left on the disc is less than 7 seconds, DISC FULL is displayed and you cannot enter the recording mode. Copyright protection The Serial Copy Management System (SCMS) prevents the making of a digital copy from a digital copy. The system allows making a digital recording from the original, however, in some countries this may require the authorisation of copyright holders. When you try to record copy protected material from an external source, COPY PROTECT will be displayed. Recording CD text If the original CD has CD text, this text will be recorded automatically, provided that the CD text is not copy protected. in that case , recording of CD text will not be possible and TEXT PROTECT will be displayed. Finalizing is a simple process that completes the recording of a CDR(W) necessary to: ­ play a recorded CDR on a standard CD player, ­ play a recorded CDRW on a CDRW compatible CD player and CD recorder, ­ avoid unwanted recordings on a disc, or ­ avoid accidental erasure of tracks on a CDRW. [. . . ] Note:When erasing several tracks, the tracks to be erased must be selected in sequence, starting from the last recorded track. You can also erase tracks 5, 4 and 3, but you cannot erase tracks 5 and 3!4 As soon as the cursor starts blinking, use the number/alphabet keys on the remote control to select a character. After selecting a character the cursor automatically moves to the next character space. [. . . ]