User manual PHILIPS 32HF7875

[. . . ] (if present) Your TV is equipped with a Kensington Security Slot, to prevent it from getting stolen. One end has to be fixed to the opening of the TV and locked with a special key. ® Kensington and MicroSaver are registered US trademarks of ACCO World Corporation with issued registrations and pending applications in other countries throughout the world. All other registered and unregistered trademarks are the property of their respective owners. [. . . ] Specifying the configurations when switching on TV The SWITCH ON / OSD menu allows you to select and configure the settings and options for : ­ ­ ­ ­ ­ ­ ­ WELCOME MESSAGE SWITCH ON PROGRAM SWITCH ON VOLUME SWITCH ON PICTURE FORMAT POWER ON VOLUME INDICATOR PROGRAM DISPLAY If LAST STATUS option is selected, the last power status will be activated when TV is switched on. If ON option is selected, the TV will always switch on when the mains cord is inserted in the mains socket and turn on. the POWER buttons on the Guest Remote Control and the TV will be enabled. If STANDBY option is selected, the TV will switch on to stand-by mode whenever the main power is switched on. If FORCED ON option is selected, the TV will always switch on when the mains cord is inserted in the mains socket and turn on. Specifying the Security options In the CONFIGURATION menu, the SECURITY feature allows you to select an option to enable access to the SETUP menu without a RC2573 setup remote control. The SECURITY feature allows you to select and configure the settings and options for : ­ ­ ­ ­ SECURITY KEYBOARD LOCK REMOTE CONTROL LOCK VIDEO OUT MUTE The SECURITY feature offers you two security modes: STANDARD and HIGH. If STANDARD option is selected, the TV SETUP menu can be accessed by entering a special security code with a guest remote control. Contact your local PHILIPS sales representative should you require further assistance. If HIGH is selected, the TV setup menu can be accessed only with a RC2573 setup remote control in setup mode. When security setting is in STANDARD mode, it may be vulnerable to unauthorized operations. Press the > button to select YES to lock the TV keyboard buttons except for the POWER button. The VIDEO OUT MUTE feature allows you to mute the Video from the TV to any external devices. The REMOTE CONTROL LOCK feature allows you to lock all the guest remote control buttons. This feature is particularly suited for television sets that are used in public areas to prevent guests with a remote from changing the channels, volume, etc. Press the > button to select YES to lock all the guest remote control buttons. Note : If a remote or keyboard command is received before the ESP time period expires, the Timer will reset and begin counting down again. The AUDIO / VIDEO MUTE feature allows you to mute the AUDIO and VIDEO source if any loss of signal transmission occurs. The ESP (Energy Saving Programmability) function allows you to select a specified period of time (from 1 HR / 2 HR . If it does not receive any commands during this period from the remote control or the TV keyboard, this energy saving feature will take effect. Note: AUTO ADJUST is only available when the input sources selected are VGA, EXT4 CVI and CARD EXT4. The RESET option allows you to return to the factory settings (default settings). [. . . ] Philips is committed to develop, produce and market products that cause no adverse health effects. Philips confirms that if its products are handled properly for their intended use, they are safe to use according to scientific evidence available today. Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardization for early integration in its products. Disposal of batteries The supplied batteries do not contain the heavy metals, mercury and cadmium. [. . . ]