User manual PANASONIC SC-HTB8GN

[. . . ] These may be subject to change. ) 1 Remote control (N2QAYB000394) Table of contents Supplied accessories Caution for AC Mains Lead Connections Preparing the remote control Demo function Control guide Disc operations Radio operations RDS broadcasts Timer Sound adjustment External unit Troubleshooting guide Specifications Maintenance Safety precautions Cover 2 4 5 5 6 8 10 10 11 12 13 15 17 17 18 1 AM loop antenna (N1DAAAA00002) 1 FM indoor antenna (RSAX0002) 2 Batteries 1 AC mains lead (K2CZ3YY00005) Operations in these instructions are described using remote control, but you can do the operations with the main unit if the controls are the same. Your unit may not look exactly as illustrated. Note · The included AC mains lead is for use with this unit only. · Do not use an AC mains lead from other equipment. EB RQTX0261-2B Caution for AC Mains Lead For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. [. . . ] The unit may not be able to play some discs due to the condition of the recording. * A process performed after recording that enables CD-R/CD-RW players to play audio CD-R and CD-RW. Caution Do not: · use irregularly shaped CDs. · use CDs with labels and stickers that are coming off or with adhesive exuding from under labels and stickers. · attach scratch-proof covers or any other kind of accessories. · clean CDs with liquids (Wipe with a soft, dry cloth). Display function This function allows you to display the information of the current track. Press [DISPLAY] repeatedly during play or pause. CD Elapsed play time MP3 Remaining play time Note about using a DualDisc The digital audio content side of a DualDisc does not meet the technical specifications of the Compact Disc Digital Audio (CD-DA) format so playback may not be possible. Elapsed play time Album name Track name ID3 (Artist) ID3 (Track) ID3 (Album) Note · Maximum number of displayable characters: approximately 30. · ID3 is a tag embedded in MP3 tracks to provide information about the track. MP3 The unit can play MP3, a method of compressing audio without hurting audio quality. When creating MP3 files to play on this unit · Maximum number of tracks and albums: 999 tracks and 256 albums. · Compatible compression rate: Between 64 kbps and 320 kbps (stereo). · Disc formats: ISO9660 level 1 and level 2 (except for extended formats). · The time for reading TOC depends on the number of the tracks, the folders or folder structures. Play Mode function Press [CD q/h]. Press [e, r, ALBUM] to select the album. Limitations on MP3 · This unit is compatible with multi-sessions but if there are a lot of sessions it takes more time for play to start. CLOCK zPLAY 1 zPLAY 2 zPLAY 3 Original display Within 5 seconds, press [u/t] or [y/i] to set the starting time. Note · The timer will start at the preset time, with the volume increasing gradually to the preset level. · The timer comes on at the set time every day if the timer is on. · The unit must be in the standby mode for the timer to function. · If you turn the unit off and on again while the timer is functioning, the finish time setting will not be activated. · When external unit is selected as the source when the timer comes on, the system turns on and engages external unit as the source. If you wish to playback from the portable audio equipment, activate the equipment's play mode and increase the volume. (See the portable audio equipment's instruction manual. ) Start time Sleep timer The SLEEP timer can turn the unit off after a set time. · Each time you press the button: Play timer indicator "ON" is displayed Press [CLOCK/TIMER] to confirm. Repeat steps 2 and 3 to set the finishing time. 30MIN 90MIN 60MIN OFF (Canceled) 120MIN Finish time Sleep timer indicator Play timer indicator "OFF" is displayed To activate the timer Press [z, PLAY] repeatedly to turn on your desired play timer. Press [^] to turn off the unit. g To check the remaining time Press [SLEEP] once RQTX0261 11 Note The play timer and sleep timer can be used together. Be sure not to overlap timer settings. Sound adjustment Selecting sound effects You can change the sound effect by selecting Preset EQ or adjusting the bass or treble effect. [. . . ] · Check the dock connection and make sure that iPod is selected as the source of music. iPod does not charge. 16 RQTX0261 Specifications g AMPLIFIER SECTION RMS Output Power Stereo mode Front Ch (both ch driven) 20 W per channel (6 ), 1 kHz, 10 % THD Phone jack Terminal Stereo, 3. 5 mm jack Output level (CD, 1 kHz, -20 dB) max. 1. 18 mW +1. 18 mW, 32 Aux (Rear) Sensitivity Normal level 630 mV, 12. 4 k High level 100 mV, 12. 4 k Terminal Stereo, 3. 5 mm jack g TUNER SECTION Preset Memory g SPEAKER SECTION Type 1 way, 1 speaker system (Bass reflex) Speaker unit(s) Full range 6. 5 cm Cone type Impedance 6 Input power (IEC) 30 W (Max) Output sound pressure 79 dB/W (1. 0m) Frequency range 55 Hz to 25 kHz (-16 dB) 90 Hz to 22 kHz (-10 dB) g GENERAL Power supply AC 220 to 240 V, 50 Hz Power consumption 28 W Dimensions (W x H x D) 500 mm x 195 mm x 102. 5 mm (D = 69 mm minimum) Mass Approx. 3 kg Operating temperature range 0 °C to +35 °C Operating humidity range 35 % to 80 % RH (no condensation) Power consumption in standby mode: 0. 2 W (approx. ) FM 30 stations AM 15 stations Frequency Modulation (FM) Frequency range 87. 50 MHz to 108. 00 MHz (50 kHz step) Antenna terminals 75 (unbalanced) Amplitude Modulation (AM) Frequency range 522 kHz to 1629 kHz (9 kHz step) g DISC SECTION Disc played [8 cm or 12 cm] (1) CD-Audio (CD-DA) (2) CD-R/RW (CD-DA, MP3) (3) MP3* * MPEG-1 Layer 3, MPEG-2 Layer 3 Pick up (CD) Wavelength 795 nm Laser power CLASS 1 Audio Output (Disc) Number of channels FL, FR, 2 channel Audio performance (CD-Audio) Frequency response 4 Hz to 20 kHz S/N ratio 95 dB Dynamic range 93 dB Total harmonic distortion 0. 005 % Note · Specifications are subject to change without notice. [. . . ]