User manual PANASONIC SC-ALL2GN

[. . . ] Operating Instructions <Full version> Wireless Speaker System Model No. Please read these instructions carefully before using this product, and save this manual for future use. RQT0A27-1B Table of contents Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Unit care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 About Bluetooth® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If a content list appears on your device, select the desired content to start playback. 6 To stream this system’s audio to the other speakers powered by AllPlay 1 From “Select Speaker”, select “ system. 2 Select the speakers to group. ” next to the device name for this ≥ You can change the speaker mode setting for SC-ALL2 to left or right channel to make stereo pairing. ≥ The number of speakers powered by AllPlay that can perform playback at the same time differs depending on the situation of use. ≥ When you turn off one of the speakers powered by AllPlay, other speakers in the same group may stop the playback. ≥ This system will be displayed as “Panasonic ALL2” if the device name is not set. ≥ When enjoying video contents with this function, the video and audio output may not be synchronised. ≥ If music is streamed to other speakers powered by AllPlay for more than 8 hours, the other speakers powered by AllPlay will automatically stop playing the music. (The specifications are subject to change without notice. ) ≥ This function will be cancelled when an alarm is activated. (l 43) - 27 - Presetting stations (Only when playback using internet radio app) This unit is compatible with the Qualcomm® AllPlay™ Radio powered by TuneIn. You can preset stations when playback using internet radio app “AllPlay Radio”. Qualcomm® AllPlay™ Radio powered by TuneIn is a product of Qualcomm Connected Experiences, Inc. You can preset up to 6 channels. ≥ A station previously stored is overwritten when another station is stored in the same channel preset. Preparation ≥ Make sure that the network is connected to the Internet. ≥ Connect a device with an “AllPlay Radio” app installed to the same network as this unit. 1 Turn this unit on. ≥ Check that the network indicator (blue) lights up. – If the network indicator is blinking in blue and red, wait until the blinking stops. 2 Start the app “AllPlay Radio”, and select a station to playback. ≥ Always use the latest version of the app. 3 Touch and hold one of [1] to [6] on the unit for at least 4 seconds to preset the selected station. e. g. , “P1” blinks 3 times when [1] is selected. - 28 - ∫ Listening to a preset channel Touch one of [1] to [6] on the unit. ≥ If the selected preset channel has not been preset or this unit is not connected to the network, “no:ch” is displayed. - 29 - Bluetooth® operations By using the Bluetooth® connection, you can listen to the sound of the Bluetooth® audio device wirelessly. ≥ Refer to the operating instructions of the Bluetooth® device for further instruction on how to connect a Bluetooth® device. Connecting via Bluetooth® menu Preparation ≥ Turn on the Bluetooth® feature of the device and place the device near this unit. ∫ Bluetooth® pairing 1 Touch [ ≥ If [ ]. ] for at least ] blinks fast, go to step 3. 2 To enter pairing mode, touch and hold [ 2 seconds. ≥[ ] will blink fast. 3 Select “SC-ALL2” from the Bluetooth® device’s Bluetooth® menu. ≥ The MAC address (e. g. , 6C:5A:B5:B3:1D:0F) may be displayed before “SC-ALL2” is displayed. ≥[ ] lights up and the device is connected to this unit. - 30 - ∫ Connecting a paired Bluetooth® device 1 Touch [ ≥[ ]. ] blinks slowly. ≥ If [ ] lights, a Bluetooth® device is already connected with this unit. (l below) 2 Select “SC-ALL2” from the Bluetooth® device’s Bluetooth® menu. 3 Start playback on the Bluetooth® device. ∫ Disconnecting a Bluetooth® device Touch and hold [ ≥[ ] blinks slowly. ] for at least 2 seconds. ≥ If prompted for the passkey, input “0000”. If a 9th device is paired, the device that has not been used for the longest time will be replaced. ≥ When [ ] is selected as the source, this unit will automatically try and connect to the last connected Bluetooth® device. ≥ When the unit is selected as the speakers powered by AllPlay or DLNA, the audio source will change to the network. ≥ Bluetooth® cannot be selected as the audio source when the unit is waiting for the WPS PUSH or WPS PIN code connection. ≥ When enjoying video contents with this function, the video and audio output may not be synchronised. - 31 - Bluetooth® standby This function allows you to connect a paired Bluetooth® device when this unit is in standby mode. [. . . ] TuneIn is a trademark of TuneIn Inc. , registered in the United States and other countries and used with permission. This product incorporates Spotify software which is subject to 3rd party licenses found here: www. spotify. com/connect/third-party-licenses The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners. DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certification marks of the Digital Living Network Alliance. [. . . ]