User manual OREGON RA122

[. . . ] iMPORTANT · The measurement functions built into the RA122 are not meant to substitute professional measurement or industrial precision devices. Values produced by this device should be considered as reasonable representations only. ⷠWhen engaging in mountain climbing or other activities in which losing your way can create a dangerous or lifethreatening situation, always be sure to use a second compass to confirm direction readings. [. . . ] Do not use abrasive or corrosive cleaning agents, as these may cause damage. ⷠDo not subject the product to excessive force, shock, dust, temperature changes, or humidity. Do not scratch hard objects against the LCD display as this may cause damage. ⷠRemove the batteries whenever you are planning to store the product for a long period of time. ⷠWhen replacing batteries, use new batteries as specified in this user manual. Contact the retailer or our customer service department if the product requires servicing. ⷠDo not touch the exposed electronic circuitry, as there is a danger of electric shock. ⷠCheck all major functions if the device has not been used for a long time. ⷠWhen disposing of this product, do so in accordance with your local waste disposal regulations. ⷠDue to printing limitations, the displays shown in this manual may differ from the actual display. ⷠThe contents of this manual may not be reproduced without the permission of the manufacturer. NOTE The technical specifications for this product and the contents of the user manual are subject to change without notice. NOTE Compass readings should be performed away from magnetic materials. Avoid large magnetic objects, power lines, loudspeakers, electric motors etc. : 12 hour clock Indicates stop watch is displayed or running Indicates alarm is on Displays clock / calendar, stop watch; compass bearing, alarm time or mode banners Displays cardinal / ordinal direction Compass segments: shows north; calibration status : Indicates battery power is low Indicates beep tone is turned OFF Indicates keypad is locked Indicates direction to turn during compass calibration There is a start-up calibration guide when the watch is turned on the first time, or after battery replacement. TURN ON DEVICE (FIRST-TIME USE ONLY) Press any key for 2 seconds to activate the LCD display. [. . . ] Hereby, Oregon Scientific, declares that this TRACKER Digital Compass Watch (Model RA122) is in compliance with EMC directive 89/336/CE. A copy of the signed and dated Declaration of Conformity is available on request via our Oregon Scientific Customer Service. Once opened, please keep the screws in a safe place to avoid losing them. [. . . ]